Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

When is Thin Too Thin?...

Posts

Re: When is Thin Too Thin?...

#26

Re: Modification?

eliot d

>There are two modifications. The most significant is to remove the fixture that attaches it to the tail stock quill and replace it with a vertical bar that fits into a second banjo. The second mod. is simply to get the Oneway laser holder and laser together with an attachment that allows you to hold the laser holder in the ElboTool. The second banjo makes the tool much more versatile in that you are not limited by the distance between the head stock and tail stock, and you can approach your turning from a greater angle by swinging the banjo out to the side.(I learned about this modification from Jorge Salinas of the Capital Area Woodturners.) The Oneway holder is a far better holder than what you get with the original tool; it's a pleasure to use.

Re: When is Thin Too Thin?...

#27

Re: If you know how to hand hollow...

eliot d

>You would be fooled by the turning I'm doing right now. It's a more-or-less 6 inch diameter spherical shape , hollowed through a 1/2 " opening. As I explained in my (too long) post, I do the hole "by hand", but the rest is done with my modified ElboTool rig with a Oneway laser holder and laser attached. The tools are of the Ellsworth home made variety, made from 3/8" 0-1 steel rod and HSS machinist cutters. I can get to 1/8" wall thickness. The process is by no means automated; it takes painstaking care to turn even with the laser rig. When the hole is small, I have the same problems as anyone else getting to all parts inside the vessel and often have to stop for a while to fashion a new tool that will reach where it needs to go. I find myself using one of those adjustable comb helpers to transfer the shape of the vessel and the hole to paper ,where I can better figure out how to shape the new tool. It's plenty of work; I have no sense of "cheating" at all.

Re: When is Thin Too Thin?...

#28

Re: I guess I'll be a pigeon... :)

Allen Neighbors

>Steve, I can use my laser system to hollow through a 5/8" hole in a hollow form, using a 1/2" tool bar. I've done it several times... but I don't try to get the walls any thinner than 1/8". I would rather have a 1/8" thick, finished piece, than a piece of fancy firewood. Know what I mean? :)

Re: When is Thin Too Thin?...

#29

Thanks

tek-Brunswick, Ohio

>

Re: When is Thin Too Thin?...

#30

Re: Thanks

eliot d

>You're welcome. If you wish to know more about the specifics of the modifications, don't hesitate to let me know. I can tell you where to get the mods done.