Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Sorby Thin 2mm Parting Tool

Posts

Sorby Thin 2mm Parting Tool

#1

Sorby Thin 2mm Parting Tool

Barry Turner

>I just bought the above tool. One of the edges at the tip of the tool is fluted. Is the tool used with this fluted edge up or down?

Re: Sorby Thin 2mm Parting Tool

#2

Re: Sorby Thin 2mm Parting Tool

Dennis Yoder

>I use it with the flute up so that it cuts 2 small and smooth edges and the middle is removed by the rest of the flute. Dennis Y

Re: Sorby Thin 2mm Parting Tool

#3

Re: Sorby Thin 2mm Parting Tool

david

>I have an Ashley Isles 1/16" parting tool that has a flute also. I use it with the flute on top.

Re: Sorby Thin 2mm Parting Tool

#4

Re: Sorby Thin 2mm Parting Tool

robert davis

>sorby recommends flute down. iused it that way for several years. inuw use it flute down..i think that is a more logical way to cut the end grain fibers

Re: Sorby Thin 2mm Parting Tool

#5

Re: Sorby Thin 2mm Parting Tool

RonZ

>I own it and use it flute down, this is what gives you the clean cut.

Re: Sorby Thin 2mm Parting Tool

#6

Re: Sorby Thin 2mm Parting Tool

Barry Turner

>Thanks........looks like it's two for two. Guess I will just have to try it and see which works best for me.....