Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Converting bowls to chainsaws

Posts

Converting bowls to chainsaws

#1

Converting bowls to chainsaws

David Breth

>It is done. A bunch of the profit proceeds from this past weekend's show, in combination with some Sears-refunded money from an earlier bad-choice chainsaw purchase have been largely plowed into a Stihl 250CBE with an 18" bar.

I've agonized over this for awhile, asked a zillion questions in a zillion places, studied, fretted, and now plunked down the cash for a quality tool that will help perpetuate the hobby. I think this was the right saw for what I'm doing - time will tell. And another benefit is that it will fend off intruders in the middle of the night if I keep the saw and a goalie mask next to my bed.

Attention wood - you will now yield to me.

David B.

Re: Converting bowls to chainsaws

#2

Re: Converting bowls to chainsaws

Curtis TX

>Congrats. I just completed the some journey a few weeks ago. Bought a Sthil and now tree looks like it need to be cut.

Curtis

Re: Converting bowls to chainsaws

#3

Stihl starting protocol

david

>Seems like each manufacturer has their own specific protocol for starting their saws. Being a first time Stihl owner, I had never used the in-line switch arrangement and do not use the saw that often so the start routine is not second nature. I have had difficulty starting at times and other times there is no trouble at all. I do realize that a warm start is different from a cold start. Nonetheless, feel pretty retarded here. For you experienced Stihl owners, what is your starting routine?

Re: Converting bowls to chainsaws

#4

Keith Tompkins

Re: Stihl starting protocol

keith tompkins

>David, Here's what I do....My Stihl is an older model, but the same procedure should work. I pull the trigger wide open, then set the choke. I pull the starter until it fires. Then, release the choke, but the throttle remains locked wide open. The saw fires the next pull, then I blip the throttle to release it from the wide open position.

Re: Converting bowls to chainsaws

#5

Re: Stihl starting protocol

Allen Neighbors

>David, my procedure for my new Stihl is exactly like Keith's. So I guess their procedures haven't changed.

When it's cold it might take two, three, or even four pulls before it sputters.

If it's a warm start I don't have to choke it. It'll crank on the first pull.

Re: Converting bowls to chainsaws

#6

Re: Stihl starting protocol

Peter Teubel

>My 170's are the same when cold. Set the throttle/choke, pull 5 times, take off the choke, pull twice. Never varies. At least they are consistent. My 390...I can't recall exactly how many pulls it takes. Haven't used it in months. My 180E is the easiest. Plug it in and squeeze the trigger ;)

Re: Converting bowls to chainsaws

#7

Re: Stihl starting protocol

Carole Valentine

>My starting procedure is just like Keith's. These saws are a dream to start - especially if you have EZ Start. I can pull it with one finger. The only other saw I have ever owned was a Crapsman that would give you a heart attack trying to start it. I gave the thing away. The guy I gave it to had a heart attack not too long ago. I hope he wasn't trying to start that saw. I was afraid to ask.

Re: Converting bowls to chainsaws

#8

Re: Stihl starting protocol

Wayne Kuhn

>Cold- Full choke, full throttle. Pull until it spits once. Open choke, pull -starts right up.

Warm/Hot No Choke full throttle-Pull starts right up.

I am also very pick about my fuel/oil mix. I only burn my mix in my saw.

Re: Converting bowls to chainsaws

#9

Thanks all for the help and advice

david

>