Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

How did you get started in woodworking?

Posts

Re: How did you get started in woodworking?

#26

Re: How Long Ago?

JKJ in East TN

>I was at the college in the late '60s. I met my wife at Berea and my sister, brother-in-law, and dad live there now so I still visit on occasion (less than a 3 hr drive from here). My sister is an RN and she took care of Rude near the end. She said he was a fascinating and likeable person.

JKJ

Re: How did you get started in woodworking?

#27

Re:I can't believe you would ...... OT

Allen Neighbors

>Jamie, I've heard people say that before, but I never jumped from a perfectly good aircraft... none of the military planes I jumped in 3 years in the 82d Abn Div was up to par.

I later did some of that rapelling stuff when I helped to pioneer the 11th Air Assault Div. 'Twas an interesting and adrenaline producing part of my youth!! :)

I envied, and still do admire, people like Jeff Myroup, who didn't use static lines. :))

Re: How did you get started in woodworking?

#28

Re:I can't believe you would ...... OT

jeff myroup

>Thanks Allen, I have to say I admire the guys that have to jump rounds, with full combat loads. I know a few guys that have done that and have the broken ankles to show. Gives a whole new meaning to PLF!

Jeff

Re: How did you get started in woodworking?

#29

Re: It was to cold to skydive

WayneLeach - NW Ont

>Jeff,

I admire your jumping, however, when I began flying with the Canadian air force that was not something we ever wanted to do. Over the years a couple of forced landings but I never wanted to jump from the plane. Still dont but ???

Wayne

Re: How did you get started in woodworking?

#30

Re: How did you get started in woodworking?

WayneLeach - NW Ont

>My dad could do anything! I wanted to do what he did and learned woodworking from him. He made his own lathes after hours at the railroad where he worked and taught me and himself the basics down the basement. I got additional training in woodshop at school but after that was too busy studying engineering and design. Ater I left the aerospace industry 30 years ago wife and I started a construction business where we had a summer home. We bought a floatplane and did work in remote areas. I had a lathe in my shop and began making necessary items and got hooked. Now I am retired and enjoying turning whenever/wherever time permits.

My dad turned a lamp for my wife one Christmas and the day after he finished it a blood clot took his life. We cherish the lamp and it has a place of honor in our house.

Wayne

Re: How did you get started in woodworking?

#31

Re: How did you get started in woodworking?

Allen Neighbors

>My Father was a finish carpenter, cabinet maker, and a perfectionist at both. When I was young, I was into coping saws and hammers and nails. I could make my own army guns, and forts! :)

When I became a teenager, I took shop in Junior High school. Later made things that we couldn't afford to buy, when I got married.

A friend asked me to build her new kitchen cabinets, since they were remodeling. At that time I owned a belt sander, sabre saw, a wood rasp, a drill, and some choice handsaws and chisels. She said draw up the plans. I did. It turned out that I charged the materials at a lumber yard, charged the necessary power tools at Sears, and built her cabinets. She paid for it all, and I had my first shop, and the rest is history. Then one day I saw some nice hollowforms and Christmas ornaments....

Re: How did you get started in woodworking?

#32

Re:Amen...!!

Allen Neighbors

>

Re: How did you get started in woodworking?

#33

Re: How did you get started in woodworking?

keith zimmerman, Normal IL

>I took shop in junior high and built two things, a footstool and a pair of bookends shaped like my initials. After that I didn't touch a tool until I bought an 1870 house and spent the next 17 years restoring it. I taught myself how to do everything that had to be done from demolition to finish carpentry. That includes building cabinets from scratch and replicating ornate woodwork.

After finishing that house we moved into a bi-level with a walk-out and I added 2 bedrooms, a bathroom, a mud room, and a mechanicals room in the lower level. Then I built my first shop and all benches and storage racks.

In 2002, I saw an episode of New Yankee Workshop where Norm had a guest turning a huge tree stump with a router. I thought that was cool, so I bought an old Sears lathe and a bunch of carbon steel tools and started turning. I had no idea what I was doing. I sharpened those tools the best I could by hand, then took the skew and turned my first bowl, completely with that skew.

keith

Re: How did you get started in woodworking?

#34

You hollowed a bowl with a skew?

Carole Valentine

>And you are still turning??? LOL

Re: How did you get started in woodworking?

#35

It was a dark and stormy night...>>>

RonZ

>...>>> isn't it always?

As far as wood in my veins, my father's father was a furniture builder. It was said he built the furniture for the Kennedy home. When he was old he still had a grip of iron. My father says I store nails in my mouth and I think with my toungue out like he did.

While I had woodshop in highschool over 30 years ago, my main interest was turning. After that I followed my fathers path and became an electronic engineer. In 2000 I lost my job and no one was hiring anyone over 40 so I looked for something else. I took a woodturning course in 2002 and the lights went on in my head. Since there was no one here that taught beyond a beginners course, I ate and slept woodturning. I bought every book, tape and disk that I could find and practised. Now I'm in my fourth year turning for a living along with teaching and selling woodturning supplies. I'm just upset I didn't start earlier.

Re: How did you get started in woodworking?

#36

Re: At an early age my parents....

Jorge Castaneda

>Back in '43, we moved into "Das Cube", the house that my dad built, a 10m x 10 m x 10m bricks and concrete atrocity with cubic rooms and square windows with square panes, and I carry him every one of the bricks. I guess dad, an electrical and mechanichal engineer was a square dude.

On sept my dad conspired with me to make christmas presents, I was 9, so we set shop in the chicken coop and he built a dinning table, square of course, a bench for the piano and a cart for my youngest bro. I did make 3 boxes for my sisters.

That did it. I been making things out of wood ever since, profesionally for the last 40 years, and never ever built anything square or cube...

Re: How did you get started in woodworking?

#37

To woo a girl

Bob Way, Canton, MI

>Well, actually I got a bit of a start in an elementary school shop class carving a candy dish, and making a napkin holder. But didn't get really serious about woodworking until I wanted to impress a girl when I was a sophmore in college. Been woodworking ever since. By the way, it worked. We just celebrated our 37th wedding anniversary.

Bob Way

Canton, MI

Re: How did you get started in woodworking?

#38

Re: How did you get started in woodworking?

Terry Quiram, Roanoke Illinois

>To the best of my recollection I started woodworking in the 5th grade. In the 1950s shop class and home economics were required classes (yes I can cook but don't tell my wife). I took woodworking classes all through school but took a hiatus from 1968 to around 1985 when I needed work on a car but didn't have the money. The owner of the shop asked me if I could refinish an old desk that belonged to his dad. That began about 5 years of restoring and refinishing antiques. At that time we lived in the country. When we moved to town I lost all that space and sold all my tools. One year later I was going nuts from nothing to do. Thats when I found and became fascinated scrolling. Jump forward to today, I now have a 1400 sq ft shop that was built in 2000 to support my scrolling business. Then in 2004 I turned a something on someones lathe and I never looked back.

Terry

Re: How did you get started in woodworking?

#39

Re: How did you get started in woodworking?

Carol in Illinois

>I picked up a few hands-on hobbies to counter my day job, which is all head-work. When I turned 50, 4 years ago, my older daughter asked me to build her a bed. I'd never done any woodworking before, and I can't imagine what on earth possessed me to say yes. I bought Taunton's Beds book, a table saw, a router, and a random orbital sander. It took me several months, working with my table saw at the far end of my kitchen, but I built her the City Bed, and it came out surprisingly well. That was four years ago. Since then, I've taken a few classes, built quite a few things and learned a lot.

In April, I satisfied a growing urge and got myself a lathe. So far, lots of fun, I haven't hurt anything. I organized my basement laundry room into a small shop last summer, but my lathe is now at the end of the kitchen. My daughters get a kick out of their woodworking mom, and continually encourage me to try the next new thing.

Re: How did you get started in woodworking?

#40

Re: Sneaky woodtuners!

Carol - now in NC Nebraska

>

Re: How did you get started in woodworking?

#41

Dick Hines

Re: How did you get started in woodworking?

Dick Hines

>It is in my blood. My grandfather was a mill wright back when they took the mill to the trees instead on hauling them to the mill. After he retired he built cabnets and boats. My father and grandfather built the house I was raised in and the one my grand parents lived in. Dad also helped to build the boats. My mothers father was not as handy and my fathers dad but could get by when the need arised.

I played in the shop when I was a kid. In the summers I used to make money cutting bird planks out for a guy who carved them into birds. I got 5 cents for everyone I cut out. Had to stand on a box to reach the bandsaw.

I started turning when I was doing a refinishing job on a yable for my wife. Got tired scraping the legs. When home and got my dad's old lathe. Sure made cleaning those legs easy.

Started turning weed pots on the old lathe but could not find a face plate to fit so I could turn bowls. Bought a Sears lathe. Used it for 2 years. After about killing my self I joined a club. They had a PM 3520 and the rest is history.

Re: How did you get started in woodworking?

#42

Re: How did you get started in woodworking?

Tom Stevenson

>My grandfarther was a sort of traveling mechanic for the Donut Corporation of America. I was brought up by him and he taught me how to fix anything. However he was always gone because his district was all of New England. I learned to use all of his metal working tools alone. But my only medium was wood. I built everything out of wood. Years later I acquired some woodworking tools and built some items. One day I went to a Woodcraft openhouse and saw a Woodturning demo. That was it. I asked my farther-in-law for his old Craftsman lathe and I never looked back. I still have a pile of 4/4 Cherry for that last table project for my wife. (That was from 1999)

Re: How did you get started in woodworking?

#43

I was young and didn't know what I was doing

keith zimmerman, Normal, IL

>