Re: Tendonitis- been there, done that!
Stuart Johnson
>Nope, hold the handle in my right against my "turning muscle" and guide it with the left. Some movement hurts like hell and other doesn't.
Knowledge You Can Build On — Est. 1998
Re: Tendonitis- been there, done that!
Stuart Johnson
>Nope, hold the handle in my right against my "turning muscle" and guide it with the left. Some movement hurts like hell and other doesn't.
Re: PA Mimosa
Carole Valentine
>The stuff Joanne was stringy too. Sharp tools and high speed needed. I have not turned any of the stuff I just got. It's really green and appears that it is going to want to move a lot. It's soft.
Re: SOooo, what did you turn today?
Carol in Illinois
>I completed a really cool magic wand this morning - after vacuuming spiders out of my turning stock. The wand has already been adopted by a local wizardly type. Durn! I was considering keeping that one, but once it's claimed, there's this energy transfer... (smile) Earlier this week, a "wand" was adopted and renamed a "yad" - the pointer used to read Torah. I feel blessed.
Over the weekend, I made my first ever pen. That went well enough that I'll have to mosey on over to Woodcraft and pick up some more fixin's. Could become as addictive as wands. The pen was not a complete embarrassment, so I took it to write with at the faculty meeting Tuesday. The prof next to me tried to steal it. Guess that means it was good enuf, eh?
Last week, I made my third lidded box for my sister Pam's birthday. So far, I like each box better than the last, but boy do I have lots to learn! I took pics of the box, but I'm still figuring out the new laptop - running Vista - and I haven't tried pictures yet. I considered making a full confession of errors I made along the way and things I obviously have yet to learn, when I post the picture. Is absolution possible?
Carol
Re: Tendonitis- been there, done that!
Carole Valentine
>Stuart, I'm right handed also, but three weeks ago I started having trouble with my left elbow. It did not hurt all the time - only certain movements. One movement in particular that was excruciating was with the arm bent and the palm facing right, any kind of downward movement/pressure. Like if you are sitting in a chair and use your left hand to rub downward along your calf. Strangely enough, it did not hurt to turn. This week it was almost gone until I started chainsawing - now it's back.
Dang! I knew it was contagious!
Carole Valentine
>
Post the pics! :)
Carole Valentine
>Boxes can be a challenge.
Re: Great Works Sue
Sue McLam in Orange, VT
>Thanks Jen. One day when I get rich from woodworking I intend to buy one of your pieces of work...I love what you do!
Sue
Re: Bisquit cutters?
Allen Neighbors
>Ruth, this is the only one that I photoed. and it wasn't finished, to post on another forum, also in answer to a request. It has a little tear-out that needs to be sanded, and the air-relief holes needed to be smoothed with a small rounded file. I didn't have one with me in Colorado, is the reason it wasn't done. It's made of pine firewood from Colorado. I made them to be used. I don't put a finish on them, after I apply the lacquer wash between 120 and 150 grits. I finish sanding them and buff.
Re: Bisquit cutters?
Allen Neighbors
>Inside.
Re: Bisquit cutters?
Allen Neighbors
>Profile.
Re: SOooo, what did you turn today?
Ed Karch
>Half of a long hollow vessel before the mustard monster died.
Died??? Oh no! What happened?
Carole Valentine
>
Re: An interesting foot
Fog Tanner
>John,
Thanks for the info, I will pick some up this weekend as I am low on masking tape anyway and have a few more projects to finish. Have you had success with any brand over another or are they all pretty much the same.
I don't think it the use of the arm, rather
Ruth Niles
>holding it in one position with a certain amount of pressure. I had pain and a burning in my left elbow for a few days, I was doing a production job, a lot of little hollowing. After reading what everyone is saying, I made one more (all are done and gone) and really concentrated on what my left arm was doing. There was actually more muscle use in the left than the right, which is where the tool handle was. The left arm was used to push and pull and the fingers are not held as comfortably as around the handle. These were small items and I was using either a small bowl or spindle or detail gouge. It was interesting to study exactly how my muscles and fingers were working. I can see where this will be painful if my arthritis gets any worse because I won't be able to wrap my fingers around the small steel.
Great Pierogi cutter for my Mom ! Thanks
Ruth Niles
>
Re: SOooo, what did you turn today?
Ed Davidson
>Turned today...this closed-end Baron rollerball has a couple of silver ring embellishments bordering a contrasting band of lucite. The silver rings are from a Coke can.
Best regards,
Ed D.
Sue!
Barb Siddiqui
>I haven't heard from you in ages...Thanks, Ruth. Sue, your website is wonderful; you've really come a long way since I first met you over on WomeninWoodworking. Congratulations on the new store account. Your furniture is beautiful, and your plates and platters outstanding. I hope it's 'turning' a serious profit. Keep up the good work.
Re: An interesting foot
John Veerkamp
>Any cheap vinyl tape. Not the good stuff. Should cost about 59 cents per roll.
Re: A beautiful walnut crotch funnel :(
JKJ in East TN
>Last year I turned a couple of funnels. These were less than 1" in diameter, made for a turning club project.
It would be fun to do a big one out of cocobolo and use it when changing the oil in the car.
Re: Sue!
Sue McLam in Orange, VT
>Hi to you too Barb! I haven't been over to Women in Woodworking in ages...not enough hours in the day but now you've motivated me to get back over there. I do visit WC every day, just don't post often. Thanks for the compliments. There's tons of galleries, gift shops, etc. in Vermont and my new goal is to try to get into more of them with my smaller work.
Hope you're doing well too.
Sue