SOooo, what did you turn today?
Ruth Niles
>
Knowledge You Can Build On — Est. 1998
SOooo, what did you turn today?
Ruth Niles
>
My stomach is turning-does that count?
steve antonucci
>
Absolutely not, unless you did it on the lathe.
Ruth Niles
>
My stomach won't fit on my lathe-only a 16" swing!
steve antonucci
>
Nothing... been two weeks
Stuart Johnson
>Two weeks ago I roughed out a Hackberry bowl. No big deal, just a bit out of balance and not very large. The next morning my left arm was so sore I could hardly lift it. What ever it is it runs down from above the elbow to half way down the forearm. We were on a trip for the last week and I hoped it would clear up but no luck. My wife says if it isn't better in a few days I have to go to the doctor so he can stick me with a big needle. That won't help but it will teach me to not hurt myself.
An interesting foot
Fog Tanner
>The foot on an interesting bowl. I made a bowl on the new Escouleon chuck. Since it will do off center and eccentric, I decided to do both at the same time. This results in the outside having several different profiles. The rim is not flat across, having one portion at an angle. The inside has to intersecting "bowls" of unequal depth. And the detail on the foot is slight offcenter, making the entry cuts interesting.
For finishing up the foot, a vacum setup would not work due to the shape. A set of cole jaws would not work as you normally would as the outside having two profiles, is also slightly oval. And there was the rim not being flat. What finally did work was using part of the buttons on the cole jaws, a wedge that supports part of the rim and lots of masking tape. A slow speed on the lathe and light touches with the gouge. Also made sure I had the Airstream on for the head protection if it failed. I was having to use real masking tape (3M) as I had run out of the cheap Wallymart brand. I normally use the Wallymart brand as it is horrible for painting but works great for clamping (due to its higher tack). Duct tape would have been better, but would have left a mess on the wood.
Later tonight its some little 6" outflowing bowls.....first I have to dye this piece.
Nothing yet, but Saturday lookout.
john lucas
>I've been on a short vacation and couldn't get near a lathe. My dad and I rebuilt an antique chair. Well actually I rebuilt it and he watched but at least we worked together. I've had to work every night this week .
Saturday I'm going to Bestwoodtools to pick up my new threading machine, soooo, I will be spending saturday afternoon learning to use it. I also got a letter from John C Campbell folkschool gallery. They sold all my mirrors in just over a month so she wants more. Gotta get those done.
Re: SOooo, what did you turn today?
Jennifer@Indy.USA
>Nothing today Ruth, Today is my Monday :(....but the past 3 days have been wonderful shop days, turning mini's, some small bowls and experimenting with some off axis turning...adventurous for me! Despite some mosquito issues late in the evening, it was most lovely. Thank you for asking!
Jen
Lately - Alabaster
Ron in Drums PA
>
Re: SOooo, what did you turn today?
George Van
>Nothing today Ruth. I am sanding and contouring a 9�x18�x8� white pine mantel that has to be finished and ready to put on the fireplace on the 15th when help will be here. It has been drying for 7 years and the time is now. It will be good to have it out of the shop!
Re: SOooo, what did you turn today?
Carole Valentine
>Roughed out a big chunk of cherry, cut up some more of that stinky mimosa and paid bills. Now I am getting ready to cook a steak on the grill, then go turn some juniper I happened upon the other day. Life is good. :)) Hope I don't jinx myself by saying that!
Stuart, could it be tennis elbow?
Ruth Niles
>Or woodturner's elbow? Seriously, maybe you pulled a muscle or something else that's inside your arm...... you know those stringy things that hold everything together?
Bring the bowl to SWAT.
Ruth Niles
>That sounds like an interesting endeavor. Isn't it amazing what we can create when we play around? with wood
Re: Nothing yet, but Saturday lookout.
Ruth Niles
>Congratulations on the mirror sales. I got a check today from one of my galleries with a note: "Please bring more of everything." I love it!
Re: SOooo, what did you turn today?
Sue McLam in Orange, VT
>Hi Ruth,
I don't usually turn much because I do mostly flat work but I actually turned a 13" cherry platter today. I found another store that wants to sell my work and I'll be making plates, platters, cutting boards and S&P grinders for them. Wouldn't you know it though, someone with bottle stoppers got in there before I did and she doesn't want mine:(
Sue
Mosquitos? teach them how to turn!
Ruth Niles
>I went out in the shop night before last, about 10:30 just to get something, turned the light on and there was a 2 1/2" night spider walking across the floor. I just stood there, tapped my foot and asked, "did you get any turning done?" He was big enough to use a mini hollowing tool! Don't you just hate bugs who look for a free ride?
And a glass of wine?
Ruth Niles
>Looks like life is good for you, Carole. I'd like to see a picture of the mimosa because my neighbor is having one cut down, he swears they are the "tree from hell", although I can't imagine why because they are so beautiful. I get all the wood I want but won't take any until I get a full report from you.
Let's see, I turned a box, then I turned another..
Mike Stafford
>I have been working on boxes with beads on the lid instead of on the body. Big change for me, huh?
Good news, Bad news, right?
Ruth Niles
>Hi Sue,
How have you been besides getting big accounts to sell plates and platters? Congratulations on the account. I have faith that you'll find some place in VT to sell the stoppers.
*by the way folks, check out Sue's website; www.knoxmountain.com she does great plates and platters plus beautiful flat work.
Re: SOooo, what did you turn today?
Gary in Zirconia,NC
>I been roughing out some large ambrosia maple platters.
Pics soon, right?
Ruth Niles
>
Incised spheres. I love making them.
Brian Hahn in SW Wisconsin
>
Re: SOooo, what did you turn today?
Barbara Gill, Remlik VA
>Nothing. :-( Between making the store run to Richmond, taking care of computer problems and unloading 4,000 bd.ft. of wood to be made into flooring I wasn't able to get to the shop.
Ruth, you're too kind!
Sue McLam in Orange, VT
>Ruth, thanks for the compliment! I'm great. Hasn't been a great business year for me but things are picking up now. I have a couple of Open Studio weekends that I'll be doing this fall and hopefully they'll generate some commissions and maybe I'll even sell a few stoppers!
I hope to make it a symposium someday and be able to meet you!
Sue
Nothing for a month, can't 'til next week
keith zimmerman, Normal IL
>