Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Sharpening a large bowl gouge

Posts

Sharpening a large bowl gouge

#1

Sharpening a large bowl gouge

Jim Rutten

>I just got a Crown PM bowl gouge 1/2 inch. I have a six inch grinder and am attempting to sharpen this gouge using my Wolverine. It is fine on the outboard side of the wheel but runs into the motor on the inboard side. I get the whole side bevel sharpened on the outboard side but only 3/4 of the side bevel sharpened on the side towards the motor. Am I doing something wrong? Anyone else have this problem? If so what did you do to solve it. Thanks for your replies.

Re: Sharpening a large bowl gouge

#2

Re: Sharpening a large bowl gouge

tdaniel

>I am sending you an email on how I set mine up. I do not do it like everyone else but it works well and is very easy. The last time I posted how to set it up the police said I was doing it wrong so I don't bother anymore.

Re: Sharpening a large bowl gouge

#3

ups, no email address for you.

tdaniel

>Please send me your email address and I will answer your question.

Re: Sharpening a large bowl gouge

#4

You are doing it wrong......

Barry Irby

>Could you copy me on that e-mail, I want to do it wrong too.

Re: Sharpening a large bowl gouge

#5

Re: ups, no email address for you.

Jim Rutten

>Sorry for not including my e-mail. It is included above. My e-mail address comes from one of the stupidest things I have ever done in my life. I was working at a hardware store and we had just gotten a large shipment of fertilizer in. My boss, who was also a big Blazing Saddles fan, told me to move the fetilizer upstairs using the freight elevator. I was in high school and not very mechanically inclined (still true) so I started loading the freight elevator. We figured I had about 2300 pounds on the freight elevator when the 900 pounds of counter weights just couldn't hold it anymore. Luckily, for me, I wasn't standing on it at the time but I was by it. The freight elevator started to go down to the basement (which it was not designed to do). Nine 100 pound counter weights were flying through the air and I was doing my best to hold onto one of the steel cables to no avail. Luckily I had good leather gloves on (they were also trashed after this. I didn't get fired. My boss had a $1200 bill to fix the freight elevator (this was like 1976 or 77) and we got very lucky on the fertilizer. We figured we lost 4-5 bags. After that my boss started calling my mongo after the big dumb guy in Blazing Saddles and it stuck. When I got my e-mail address I added the r on it for my last name.

Re: Sharpening a large bowl gouge

#6

Re: ups, no email address for you.

Rick Allen

>What a great story(:->)

I can so easily see that having happened to me.

Re: Sharpening a large bowl gouge

#7

TD, please.....

Jennifer@Indy.USA

>TD,

Honestly, I have not seen one positive thing posted by you in days. Every bit of what you type and post here is negative beyond belief. If you are so disgruntled with this place and everyone who likes to enjoy a pleasant atmosphere then I suggest you rethink why you are hanging out here? It is starting to become a yucky environment and it's very draining on everyone who calls WoodCentral home. The whining and poor me posts are bordering on juvenile really. Cheer up! Look at the positive sides of things. Seriously, dude...it's not healthy to be so negative. Go for a walk and get a breath of fresh air.

Jen :)

Re: Sharpening a large bowl gouge

#8

I just sent an email to MK, get a copy

tdaniel

>

Re: Sharpening a large bowl gouge

#9

Thank you, Jen! Maybe he will listen ...

Ed Moore

>to a pretty girl. He sure didn't take the hint when this old geezer suggested kindly that he put a sock in it.

Ed

Re: Sharpening a large bowl gouge

#10

Re: TD, please.....

Nelson

>Agree with you Jen, a year ago we had to go thru all this trash with TD and he finally went away for a long time with out posting maybe he will crawl back in his hole.

Re: Sharpening a large bowl gouge

#11

Well Said Jennifer.

Barbara Gill, Remlik VA

>

Re: Sharpening a large bowl gouge

#12

Thanks Jen

Martha Roberts

>Someone must be forgetting his medication!

Re: Sharpening a large bowl gouge

#13

Re: ups, no email address for you.

Doug Thompson near Cleveland

>I like your story... I wish my boss was so nice... LoL

Re: Sharpening a large bowl gouge

#14

Re: TD, please.....

Charles Watson

>I don't think TD started all this stuff---not by himself for sure.

Re: Sharpening a large bowl gouge

#15

No dog in the chase and

Roger Smith

>I should keep my mouth shut. I read this thread several times. I see two things. Jim asked for help. TD offered help and made a side comment. Everyone is focus on that side comment. Also, I did not notice anyone else offering Jim any help.

Re: Sharpening a large bowl gouge

#16

Thank You Jennifer NM

Jerry from Lapel In.

>

Re: Sharpening a large bowl gouge

#17

Re: No dog here either, but...

Carol - now in NC Nebraska

>why answer off line? Isn't the whole purpose of the forum to learn from one another. A different way to do things is not necessarily wrong. It is just different - and it may the difference that works for others.

So somebody answer the man's question, please. On-line, of course. What works for you and why you think that is the case? I have a 1/2" bowl gouge that I have yet to sharpen. Of course, I am going to bring all my tools to Indy Fest and get hands on instruction! LOL!

Re: Sharpening a large bowl gouge

#18

Keith Tompkins

Re: Sharpening a large bowl gouge

keith tompkins

>JIm, You may have to post a photo of your set-up. Without seeing what's happening, it sounds like the diameter of the motor is too large for a 6" wheel. I would guess that the wolverine jig itself is hitting the motor?

Your only alternative, short of buying a new grinder, may be to increase the distance the tool protrudes from the jig, and move the rest back accordingly.

Re: Sharpening a large bowl gouge

#19

Steve Kubien

OT first time driving a forklift

Steve Kubien

>Well, since we're telling embarassing teenage work stories....

I was walking through the warehouse when I was about 16. Shop foreman has the boom extended on the forklift and he is 15 or 16ft off the ground adjusting a lift.

Foreman: "Steve, hop on, back this thing up and lower me down."

Me: "I don't know how to drive." (I'd never driven anything with a motor before).

Foreman: "Hop on. I'll walk you through it."

So I do.

Foreman: "The lever on the left, put in the middle position (neutral) and turn the key. Good. Stand on the left-most pedal. That's the clutch. Flip the lever back and give it a bit of gas."

I do as I am told and nothing happens.

Foreman: "Give it some more gas." Nothing happens. "Floor it!", he says so i do and the engine is now roaring. He screams at me, "Is your foot still on the clutch?!?!"

Me: "Yes!"

Foreman: "Take it off!"

So I did.

.

.

.

.

The forklift bounced backwards with the foreman riding the boom as though it was a bucking bull. We stopped when we slammed into the $3000 (1987 dollars) worth of kitchen cabinets.

.

.

.

They trained me how to drive forklift the next week. No one was hurt but I was called "Crash" for about 3 years.

Funny, but I always smile when I tell that story.

Steve Kubien

Re: Sharpening a large bowl gouge

#20

Re: Steve- you smile because .....

Jamie Donaldson

>... we all did really dumb things like that and actually survived into adulthood. Of course if our children knew all that history we would have to kill them!

Re: Sharpening a large bowl gouge

#21

Re: Sharpening a large bowl gouge

john lucas

>Jim I just played with my old Craftsman grinder which has the problem of the motor being too big. Without hooking up my wolverine to it Keith may be on the right track if the motor size is the problem. It looks like you might have to shorten the length the tool comes out of the wolverine. Play with the extension to see if you can get the knob and housing of the wolverine to clear the motor.

Is your grind stone full size. If it's worn down to 5 1/2 or 5 it will be harder to miss the motor on one side.

When I used the Craftsman grinder I hand sharpened the gouges. Instead of holding the tool more or less horizontal when I sharpened the wings I held the tool at about 5 oclock for the right side wing and 7 for the left wing. Of course this won't work for the Wolverine.

Re: Sharpening a large bowl gouge

#22

Re: Sharpening a large bowl gouge

david

>I recommend you check out the article in American Woodturner, Winter 2006 issue, where Kirk DeHeer wrote an article called "Sharpening Demystified". Has photos, recommended settings for the Vari-grind tool holder and a plywood template that you can make and use arriving at 40, 45, and 50 degree bevel of cut. I made the template and setup my Wolverine jig according to the article. I have two 1/2-inch bowl gouges by different makers, and can grind both sides of the fingernail grind with this setup with no difficulty. If you have no access to the article, email me offline and I can send you a copy.

Re: Sharpening a large bowl gouge

#23

Re: ups, no email address for you.

Dave Peebles Lyons, Ohio!

>Thanks Jim,

You just made my day.. Great story, sound like one of mine. But I will not bother you with the time I destroyed several acres of prime soybeans thinking it was weeds.

16 years old and working on a truck farm. I am sure my boss never forgot me. But I will never forget the interesting way the veins stood out on his neck. :)

Dave

Re: Sharpening a large bowl gouge

#24

Re: Sharpening a large bowl gouge

Gary Evans Tallassee, TN

>Hi Jim,

I have a 6" Baldor grinder with the Wolverine and Vari-grind set up according to One Way's instructions. I haven't had any problems sharpening my 1/2" Crown PM.

I wonder if it is the size of your grinder motor that is causing the problem as Keith and John suggested?

Gary

Re: Sharpening a large bowl gouge

#25

Re: OT first time driving a forklift

Jim Rutten

>Great story, Steve.