Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Pen blank questions...Ken Oakley?

Posts

Pen blank questions...Ken Oakley?

#1

Pen blank questions...Ken Oakley?

Gary Evans Tallassee, TN

>Hi all, and especially Ken,

I'm just addressing Ken because I know he has sold some pen blanks on E-bay, but I'd be interested in anyone's opinion.

I am in the process of cutting up some highly figured spalted maple and hackberry scraps into pen-sized blanks, 3/4"x3/4"x5". I haven't gone to E-bay yet to research how folks are selling their blanks, but I seem to remember that selling in lots of 10 or so is common. This wood seems to me to be extraordinary so I'm curious about making sure I get a fair price.

I'm also curious about culling blanks with worm holes. Here is an example. The gullies tend to be about 1/8" or less deep, though some of the holes go deeper. Perhaps an opportunity to add turquoise or other color to the blank? The wood itself is quite solid, by the way.

If nothing else, enjoy the beauty of this wood.

Gary


img

Re: Pen blank questions...Ken Oakley?

#2

Another pic.

Gary Evans Tallassee, TN

>This is a piece of very pretty hackberry. I think there is enough variation in color to translate into a pretty pen.

Gary


img

Re: Pen blank questions...Ken Oakley?

#3

What about short grain?

Gary Evans Tallassee, TN

>We have cut a lot of this up into pieces with short grain in order to maximize the figure in the pen. I know that these blanks are a bit more fragile, though I can't imagine anybody seeing whether he could break one or not. What do you think about selling the ones with short grain?

This one is maple.

Gary


img

Re: Pen blank questions...Ken Oakley?

#4

Short grain goes against all logic...

david

>and frankly doesn't look as appealing to me. The first figured and spalted maple piece was beautiful.

Re: Pen blank questions...Ken Oakley?

#5

Re: What about short grain?

Jerry Whitaker

>I turn a lot of "short" grain, "cross" grain pens. They are more fragile but most of the time worth the extra effort involved. All it takes is a sharp skew and a little more patience. Many times going cross grain will produce a nice pen using wood that would be rather plain by going with the grain.

Re: Pen blank questions...Ken Oakley?

#6

Re: Short grain goes against all logic...

Gary Evans Tallassee, TN

>Hi David,

No offense, but I'm not sure why short grain pen blanks would be illogical. You are cutting the blank into two 2"+ pieces, drilling a hole through each and then gluing a brass tube to the inside. At that point you will turn the wood down to something less than 1/8" in most cases. Then you put a relatively hard finish on it, or coat it with CA. Should be plenty stable unless the wood is unusually soft. I wouldn't sell soft blanks anyway, even if they were cut long-grain.

I'll try to get some pics tomorrow of some of the hackberry short-grain blanks. They are really gorgeous.

Gary

Re: Pen blank questions...Ken Oakley?

#7

Re: What about short grain?

Gary Evans Tallassee, TN

>Thanks, Jerry,

I didn't think I was crazy by cutting some of the wood this way. This stuff is so pretty, I just didn't want to waste any of it if I could help it.

Gary

Re: Pen blank questions...Ken Oakley?

#8

Re: Pen blank questions...Ken Oakley?

Ken Oakley-Sunny St. Cloud, Fla.

>I cut my blanks 3/4"sq. by 6" but have been told by some 5" is long enough. My normal listing on Ebay is 6 blanks with an opening bid of $5.00, plus shipping.

I do not sell any that have insect holes, punky spots, cracks, splits or knots.

Spalted wood seems to do well in the bidding. My best has been $22.00 for 6 blanks.

Set the listing up so it ends Sunday evening between 7 PM and 11PM.

I have not been able to buy my new Lexus yet but at the end of the year I have made enough to buy some new toy--mechanical or human.

Re: Pen blank questions...Ken Oakley?

#9

Re: Pen blank questions...Ken Oakley?

eaglesc

>Cross cut or bias cut usually finishes into a much more interesting pen.

Don't take my word for it check out Russes site.

I know he has made that statement.

It will yield fewer pens from a piece of stock, but that is why I normally don't buy individual blanks.

I want to get the best looking pen , not the most blanks.

Re: Pen blank questions...Ken Oakley?

#10

Re: Pen blank questions...Ken Oakley?

Gary Evans Tallassee, TN

>Thanks for the info, Ken.

Just what I was looking for.

Gary

Re: Pen blank questions...Ken Oakley?

#11

Re: Pen blank questions...Ken Oakley?

Gary Evans Tallassee, TN

>Hi eaglesc,

We're cutting this stuff up out of the scraps from bowl blanks. This stuff is so pretty, I don't want to waste any that I don't have to. Consequently, I am ending up cutting at all different angles to the axis of the tree, anywhere I can salvage 3/4"x3/4" or 2"x2".

Gary

Re: Pen blank questions...Ken Oakley?

#12

Re: What about short grain?

Barbara Gill, Remlik VA

>I would be real interesting seeing one soaked with CA glue before the final pass with the skew... well, allowing it to dry first of course. :-)