Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Doing it backwards

Posts

Re: Doing it backwards

#26

My dog and 2 kittens and I enjoy

Ruth Niles

>many good conversations while I'm enjoying some wine or a few beers. Funny how smart and communicative they can be when we really relax!!!!!

Re: Doing it backwards

#27

Buzz Words..............

Barry Turner

>But when you use all those "buzz-words" you are supposed to sound so much more intelligent, knowledgeable and professional.

We do it all the time at work. "Competencies", "partnering", "interventions", "behavior modification"..........ad infinitum.

It's sort of like twins having a secret language. But, the end result is always the same, nobody knows what the hell we are talking about. (Not even us, most of the time!)

Others use acronyms. The military is absolutely the worst at this. AWOL, etc. If we had stopped the use of acronyms in the military, we would have been out of Iraq years ago. Its like having a secret code without actually having one.

Re: Doing it backwards

#28

Bill is Not exaggerating about his wood stash!

Ruth Niles

>I saw it! You would not believe the amount of green wood this man has, when you drive past his place, you cannot see the house for the stacks of wood.........seriously! In fact, it's sort of hard to see the inside for the amount of roughed out and finished bowls.

I really need to go back for another visit for inspiration.

Re: Doing it backwards

#29

"Finding your own voice" is one of my

Ruth Niles

>pet peeves, too, Mac. We all have our own voices. I know they mean don't copy too precisely (key word being "precisely") so just say that. Guess we are too used to saying what we mean in plain talk.

Re: Doing it backwards

#30

Re: Doing it backwards

Barry Irby

>I do it BACkwards. Where BAC stands for Bad A$$ed Catch. I put the piece on the lathe and generally try to get the best bowl out of it. Then the catch occurs and the design becomes whatever I can get out of what is left.

Re: Doing it backwards

#31

Re: Doing it backwards

Bill Neddow

>Art, although we may seem to be coming from different places, I really think we are close to having the same approach. I would not mount a two foot half-log of Walnut on the lathe and then decide to make a honey dipper. I have a pile of pieces specifically cut to the rough sizes for the non-bowl items I make like weed pots and bottle stoppers.

The decision on what I am making is made long before I ever get to the lathe. When I mention that I assess a rough block of wood, decide what shape of bowl it is going to be, turn it round and then stop the lathe and reassess the situation -- I know in advance I am going to make a bowl. These blocks of wood are cut from the log specifically to make bowls and are pre-balanced for grain orientation with a chain saw before they ever go near a lathe. Once the piece is round, and I can really assess the grain, I may decide to change from an ogee shape I had originally planned to more of a half-moon shape. But that will be because I have found some really pretty grain that would disappear into shaving if I continued with the ogee shape concept.

I have also had some good turners visiting, like Jimmy Clewes and David Springett. They do have requirements. Even Jimmy can't turn a square, lidded, Chinese bowl out of a piece of bottle stopper wood. And Jimmy's requirements are quite different from David's, who is generally working with much smaller pieces of wood. But I found that both of them were very sensitive to the wood. Jimmy even changed the shape of his Chinese bowl at our club demo to more of a rectangular shape than normal because I had a wonderfully curly piece of Big Leaf Maple he fell in love with.

I do not sit down and draft out mechanical drawings of where I am going like Mike Darlow. But I sure have a pretty good idea of where I am going before I turn on the lathe.

I remember one demonstrator we had who made the point that it is necessary to have a plan of attack -- and he did it in a very humorous way. The wood turner he described was the typical weekend turner who has been waiting all week to get at the lathe. He plans to turn a bowl on Saturday afternoon, and by 1 p.m. he is in his shop. He finds a block of wood, mounts it on his lathe, and waits for inspiration. It does not come, so he turns a bit, realizes he is getting nowhere, and decides to have a coffee. While he is in the kitchen, his wife asks him to take out the garbage -- and he meets one of the neighbors who wants to chat. Half an hour later, he is back in the shop, coffee in hand, and the wood is definitely not "speaking" to him. After a while, he decides a cookie would be good with the coffee, So he goes back into the house, gets the cookie, and flips through some old wood turning magazines to get inspiration.Then he realizes his son is watching the football game. Fourth quarter -- all tied. It wouldn't harm to watch a few minutes. Then it goes into overtime. A couple of beers later, the game is over. It is 5 p.m.. He has accomplished nothing, and because he has had a couple of beers, he decides he had better put off the turning to another day.

As the story was being told, I noticed a lot of smiles in the audience. He had obviously hit on something almost everyone had done.

His solution -- Check out your block of wood on Tuesday night. Dig out the magazines on Wednesday night and use them for bedtime reading. By Friday you should have found something to give you an idea of what to make with that block of wood. Whether you prepare mechanical drawing, sketch it out, or simply take the picture out to the shop with you for inspiration does not really matter. What matters is that you have a plan of attack. When you get to the shop Saturday afternoon, you can get right into making the chips fly. No need for coffee breaks. Somehow or other, a lot seems to get done this way.

Re: Doing it backwards

#32

Re: My dog and 2 kittens and I enjoy

Bill Neddow

>Ruth, you haven't replaced the chickens? They are real good conversationalists -- at least, they like to chat a lot.

Re: Doing it backwards

#34

Mike Stafford

Re: The wood spoketh unto me *link*

Mike Stafford

>I have pieces just like that nailed to my rafters. I wonder if I could have sold them for $4000 if I hadn't driven a nail through them....?

Misplaced decimal points anyone????

Re: Doing it backwards

#35

Re: Doing it backwards

Art Liestman

>I agree with you Bill. My main point was that Russ had taken a swipe at "famous woodturners" by suggesting that they (whoever they are - and I would argue that Russ is a famous woodturner) often advocate letting the wood speak. I have heard a couple of (definitely not famous) turners say that, but it always strikes me as silly - definitely not a recipe for success.

Re: Doing it backwards

#36

Re: Ya gotta see this posted link!

Wayne Allen, Carson City, NV

>It's amazing to see how people have copied my work, and the prices they charge. My pieces are half that price!

Re: Doing it backwards

#37

it was ESP

robert davis

>

Re: Doing it backwards

#38

Re: Doing it backwards

C.W.Stivison

>I just turn it until all of my mistakes are gone and then I determine if it is a bowl a dish a plate or firewood.

CW

Re: Doing it backwards

#39

I found my voice

Dominic Greco in Richboro PA

>And it's the "Donald Duck" one I do to make my daughter laugh.

To be honest, I also can't stand that phrase! It's brought to you by the same people that debated for 1 1/2 years over the name "spindle roughing gouge".

See ya around,

Dominic

Re: Doing it backwards

#40

Re: I found my voice

Mark Kauder, Phenix City, AL

>Though I do not like the term either, I at least understand it. It is usually used to mean - find your own shapes and decorations, and stop copying mine.

Mark

Re: Doing it backwards

#41

Re: Doing it backwards

Fog Tanner

>At one of our club meetings, we had some of the work critiqued by a pottery "artist". When she got to one piece which she had selected, someone questioned her on why she had chosen it. It was a nicely executed bowl, but nothing spectaular as for as form went - just a nice average bowl. But, it had some interesting grain. Her responce was the "wood spoke to her". It left sevreal of us in a quandry, as that wood had been "dead" for sevreal years before it was shaped. Had it been alive, I have only known a few people that could carry on a conversation with tree. None of which are allowed the use of sharp tools these days. The guy that made the bowl even admitted that he had not been privy to any conversation with said wood, and felt slighted. I had wanted to ask her if she talked with her clay before she made whatever it was she made. I am sure the conversations would have been most interesting.

I guess I follow more along the lines of Russ, I have an idea of the shape and then make that regardless of the argument put up by the wood. Should the wood voice an opinion different that the direction I am headed in, I am the one holding the steel and I can make shavings. But, if I hear an inantimate object speaking to me then its also time to put down the tools and turn off the machine. I always remember that a '55 Chevy looks good no matter what color it is painted, but no paint can help an AMC Pacer....

Re: Doing it backwards

#42

Re: Doing it backwards

Jerry Whitaker

>According to Charlie b, wood does talk

Found this on his website.....

Charlie Belden, aka charlie b, lives in Silly Cone Valley. He is a "right brain" and "left brain" person (He can do "math" AND draw a straight line without ruler)..

http://web.hypersurf.com/~charlie2/DasBench/ConversationsWithWood.html