Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Just Skewing Around & More Skewing Around *LINK*

Posts

Just Skewing Around & More Skewing Around *LINK*

#1

Just Skewing Around & More Skewing Around *LINK*

charlie belden

>Santos Mahogany finials done just to see how

fine I could turn it with a half inch curved edge

skew (and a regular 1/4" bench chisel).

The second pic is of cribbage pegs, again in

Santos Mahogany - done with a 1/4" bench

chisel and a 1/16th inch thick parting tool

made from an old "bayonet saw" blade. The

"spigot/tenens" are 1/8th inch in diameter.

Fun this turning thing.

charlie b


img

Spinarets

Re: Just Skewing Around & More Skewing Around *LINK*

#2

beautifully done

john lucas

>

Re: Just Skewing Around & More Skewing Around *LINK*

#3

Re: Just Skewing Around & More Skewing Around

JKJ in East TN

>Charlie,

Most excellent! Thin spindles are one of mostest favoritest things to turn and the skew and I are finally becoming friends.

And what a nice idea for illustrating the technique in the link. I liked the animated GIF, but the succession of tool positions above is an especially good example of an effective technical graphic illustration. I usually cut such curves with the long point up - I'll certainly try your method soon.

I hope you don't mind if I bookmark your web site. There's a wealth of info there! (You must have a compulsion to illustrate and teach :) The first one I clicked on at random was about the hairsticks which I also made one year as Christmas presents.

BTW, I strongly agree with the value of chucking the headstock end of a thin spindle as you suggest on your Turning12 page. However, instead of using a chuck with jaws, I've come to prefer turning a quick #2 morse taper on one end (about 1/2-3/4" long) then jam that directly into the headstock. This is pretty quick and seems to work as well as a chuck, but gives me a bit more working room on that end. I do use the 4-jaw chuck for turning larger diameters, such as for tops and weed pots which I turn without the tailstock.

JKJ

Re: Just Skewing Around & More Skewing Around *LINK*

#4

Great animation and diagrams!

david

>

Re: Just Skewing Around & More Skewing Around *LINK*

#5

Re: Just Skewing Around & More Skewing Around

RonZ

>Very nicely done Charlie!