Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

#1 hunter tool in new holders

Posts

Re: #1 hunter tool in new holders

#26

Mike Hunter

Re: Oh, Oh...teacher! I have a question...

Mike Hunter

>Jennifer ... John has done a great job to develop this small diameter hollowing tool. The screw is a torx screw with a metric thread. There is a taper on the screw which matches the taper on the cutter which provides secure locking of the cutter.

#1 cutter ... use a # 1 screw, M2.5-0.45 tap, T-7 torx

#3 & #4 cutters ... both use # 4 screws, M4-.7 tap, T-15 torx

Cutters, screws, torx wrenches are all available.

Re: #1 hunter tool in new holders

#27

Hey Mike!

Ron in Drums PA

>I was wondering...

What happened to the #2 cutter?

Re: #1 hunter tool in new holders

#28

Re: I recomend: buy Mike's holder

Bill Turpin in WNC mountains

>By the time you purchase a cutter, screw, tap, drill bit: You will still not have a Hunter tool. Mike has done all the forethought as to angles, bevel rubbing block, etc. There are some very subtle dimensions to try and replicate. I put my number one, round shank, into a Grizzly tool that came with a cheap steel cutter. A little heat and some CA glue ...I had my tool finished in less than five minutes. And I will ask the same question: Where is the #2?

Bill and Nettie Turpin in WNC mountains

VERY SATISFIED CUSTOMERS!

Re: #1 hunter tool in new holders

#29

Oh, OK. I ordered the #3 and #4 cutters today.

Eddie Pacheco: San Jose, Ca.

>

Re: #1 hunter tool in new holders

#30

Re: more like this

Mike Nelson

>Ron, have you ever used these carbide inserts as scrapers? Seems like they would work well inside hollow forms.

Re: #1 hunter tool in new holders

#31

Re: close up

Charlie Drake

>John, I have the #4 tool and the cutter is sort of recessed in the holder so the back side of the carbide cutter is supported in this angled recess. Does your #1 cutter sit in the same type of angled recess or is it just a 90 degree shoulder? I have the capability to cut the 90 but not an angle. Thanks a lot.

Re: #1 hunter tool in new holders

#32

Mike Hunter

Re: I recomend: buy Mike's holder

Mike Hunter

>Ron, Bill ... there is a # 2 size available, however the # 1, and then jumping to the # 3 or # 4 seem to cover most applications. Some tools have been made with the # 2, but the small size of the # 1 is a great universal application tool. My "Hats Off" to John for the tool he has designed with the # 1 cutter. Mike

Re: #1 hunter tool in new holders

#33

Re: close up

john lucas

>Charlie The first 2 are in a milled recess. The round one is just sitting on an area I filed flat. Either way seems to work. I would have to play more to find out the advantage of having the cutter recessed. Lowering the height is the first thing that comes to mind. Since I use these at such a steep angle lowering the cutter won't make any difference. You could still grind or file the round bar down to make a flat area but I would taper the ridge so it won't trap shavings.

Re: #1 hunter tool in new holders

#34

Re: #1 hunter tool in new holders *LINK*

Dennis Daudelin

>Hi John,

I really love the new tools that you made using the Hunter #1 cutter! I'm going to try that myself. So far, I've only been working with his #3 cutter.

I do know that you can now buy Hunter cutters and tools right off his site. The #1 cutters are listed on the Accessories page. That sure makes it easy to get them!!

You can find this at Mike Hunter's website at:


Mike Hunter Website

Re: #1 hunter tool in new holders

#35

Dick Hines

Re: #1 hunter tool in new holders

Dick Hines

>John, Jamieson sells carbide cutters in 3/16 size at the same price as the Hunter. That would be a little bit smaller. May work better in your ornaments.