Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Bill Grumbine?

Posts

Bill Grumbine?

#1

Bill Grumbine?

Atwerz

>How many years did you turn before you got on top of your shop and yelled for all to hear, "I am the greatest" "Me Whee" type of a poem? I've been turning 2 years and am 67 and don't think I'll get there in time to brag or be admired in the turning community. However I have most every tool similar to yours I see in your background videos and pics. Maybe its the same way to get to Carnegie Hall. The 5&6 yr old grandsons think I'm a racehorse turner. I have a autographed book by John Horn on the cover and the boys think thats something else. It just ain't me---yet.

Re: Bill Grumbine?

#2

Re: Bill Grumbine?

Bill Grumbine (Kutztown PA)

>Well actually, I have always seen fit to let other people be the ones who say what they think about me and my turning ability. Using that criteria, you have already arrived, since the opinion of your grandsons is much more important (to my way of thinking anyway) than the opinion of other people. If the kids are looking up to you, you have a great thing that is to be envied by those who do not have that kind of respect and admiration.

Bill

Re: Bill Grumbine?

#3

Bill, good answer to an awkward question.

Ed Moore

>

Re: Bill Grumbine?

#4

Not a "good" answer, but an Excellent one!

Ruth Niles

>

Re: Bill Grumbine?

#5

How to:

TDaniel

>When you try to get to the top of any art form you must do one of two things; either start early or focus on one area until you become the best in that area. Nothing can replace 30 years of experience, however, by concentrating on one area you can become quite good in a rather short period of time. Read the thread below concerning Mark Kauder. I remember just a few years ago when he brought his first pieces to the SSS. I bought one of those pieces because I knew he would get it right because he had the determination to do that and he was focused. I know of others who try to learn it all at once who have never turned an outstanding piece. You must realize that the most time consuming part of this art form is in learning the material itself. No other art forms requires so much knowledge of the material. You have thousands of species of trees, vines, bushes, etc. multiplied by effects from figure caused by various things including burl, spalting, crotch wood, root burl, insect damage, fungus etc., etc. It is too much to learn all at once. Concentrate on a few shapes and practice until you get it right. Pick a few woods and work with them until you know their characteristics well. Pick a finish or two and stay with it until you can apply it well. The key is to get one thing right before going on to the next.

Re: Bill Grumbine?

#6

Re: Bill Grumbine?

Jim Shaver - Oakville, Ontario

>Hi Bill,

Your words are simply perfectly stated.....the other side is if you are having fun, who cares, it's about your own self motivations and satisfaction....greatness is never a measure but an opinion of others.

Tak ecare,

Jim

Re: Bill Grumbine?

#7

I love being corrected by the ...

Ed Moore

>Yogi Berra of the woodturning world. [GRIN]

Ed

Re: Bill Grumbine?

#8

Re: Bill Grumbine?

Steve Mushinski

>I must say that once you get the chance to spend sometime with Bill you might find that wood turning might not be what he is the greatest at. It just might be that big smile he wears on his face, might be the wonderful family he has around him, or it might be the entertaining natural about him. What ever he may or may not be I know for me anyway, I am just pleased to be able to call him a friend. - Steve

Re: Bill Grumbine?

#9

Re: Bill Grumbine?

Sean Troy

>I think thats the best answer anyone could have stated.

Re: Bill Grumbine?

#10

Re: How to:

Mark Kauder, Phenix City, AL

>My comments here have nothing to do with my name being mentioned by TD.

I think that Terry is absolutely right. In most of us, there is a tendency when we pick up any new hobby/craft/whatever to be consumed with finding out about all aspects of that hobby, and if possible trying it out. We go to demonstrations and symposia, and learn all sorts of new techniques, tools and materials. And we want to do them all.

I once said that I was going to do a segmented, hollowed, pierced, burned, stained, painted, textured, guilded, and finialed piece. I would call it "Too Many Darn Demos".

My point is not that you should not go to all these different demonstrations, but put most of them in your mental library for when you are ready to use them, and then really use them long enough to get good at them.

I go to all these demos as well. But now a I go, as much as anything, to see how that person thinks and develops his/her projects, and maybe I will find one little thing that clicks to improve something I am already doing, etc.

Right on, TD.

Mark

Re: Bill Grumbine?

#11

Define Yourself

Mark Mandell - Gone Round In Jersey

>in terms of what Others think of you or your work and you choose rejection and perceived failure over success and pride in your achievements.

But at 67 you already knew that, right? |;-}

mm

Re: Bill Grumbine?

#12

Bill Grumbine

David Propst

>There are many excellent turners and having seen many of Bill's pieces in person I would place him in that category. However there are far fewer excellent turners who have the gifts of communication, patience, and personality to be an excellent teacher of turning and Bill is one of the best. For many years before Bill had released his videos or became popular on the club and show demonstrator circuit he had been helping scores learn turning. He has been an ever helpful presence on turning forums for at least 12 years by my count. His detailed posts and "photo essays" here at WC and on for many years before on Badger Pond have been invaluable.

Bill is knowledgeable, gregarious, gracious, and giving. We are privileged to have his participation here. You should get his videos and if ever possible take a lesson with him, it will be a wonderful experience.

David

Re: Bill Grumbine?

#13

Great thread, folks!

david

>

Re: Bill Grumbine?

#14

2nd that and great way to start the day.

Eddie Pacheco, San Jose, Ca.

>Thank you, Bill, for an answer that came straight from the heart.

Re: Bill Grumbine?

#15

You know you've reached expert status when......

Pete in Holland, MI

>........more people ask you for help and advice than you ask of others.

Re: Bill Grumbine?

#16

Re: You know you've reached expert status when....

Mark Kauder, Phenix City, AL

>Yeah, I once heard one demonstrator say that he never wanted to reach 'THE Expert' status', because when you are 'The Expert" you don't have somewhere to go when you have a problem.

Mark

Re: Bill Grumbine?

#17

Hear Hear!

Dominic Greco in Richboro PA

>David,

Boy I wish I had gotten in on this thread earlier!

I've had the unique opportunity to get to know Bill personally as a friend. And just as importantly, I would place him at the top of my list of preferred teachers. I took classes with him way back in 2000 when I first got into turning. He's knowledgeable, skilled, personable, and most of all patient!

One other thing about Bill, he talks the talk and walks the walk. If he says he's used a technique or tool, or attempted a "tricky turning move" you can bet he can post pictures of himself demonstrating the process. Many times after getting a question from a turner, Bill has followed up with a great article that details the answer (not to mention making two extremely well selling, world class Turning DVDs).

The internet is a great "place". But it tends to breeds "instant experts" who talk a great game (or as I like to call them, "Empty barrels making a lot of noise"). But when it comes time to put up or shut up, they're no where to be seen. Bill is not like that.

See you around,

Dominic

Re: Bill Grumbine?

#18

Re: You know you've reached expert status when....

Tim GC

>Never wanted "Expert" status after hearing an old guy once describe an EXPERT as a "Has Been" and a "Drip under Pressure"

Re: Bill Grumbine?

#19

An other happy student from 2000

Dave Smith, Longview, WA

>