Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

metal lathes

Posts

metal lathes

#1

metal lathes

eliot d

>Does anyone use a metal lathe -- perhaps to make adapters and other devices useful for wood turning? I've gotten onto the metal working sights, but those guys are terribly serious about their lathes and scoff at anything small and coming from the

Far East. I like the idea of making some things useful to wood turners -- or just playing around for that matter, but there seems to be an entire world of "tool room standard" machinist out there that I find intimidating.

Re: metal lathes

#2

Re: metal lathes

john lucas

>Elliot Buy what you can and have fun. It's a lot like woodturning. you can do limited work with anything. The better the lathe the easier it is to do accurate work. My last metal lathe was the harbour Freight 7x10 that any machinist will say is absolute junk. It is, but I had a lot of fun making stuff for my woodworking. I learned a lot about tolerances and how to deal with a lathe that isn't quality. This has helped me a lot. Now I have a Smithy, which is way better than the HF but still considered a lathe/mill that needs lots of work to be accurate.

That's OK with me. I'll have fun learning to tune it up and I'll make a lot of cool stuff while I'm learning.

I will agree that a decent lathe speeds up the learning curve and is a lot more fun.

Re: metal lathes

#3

Re: metal lathes

Ed Karch

>Eliot

I have a small lathe and tooling I can loan you to try out. Yes I found the metal lathe people rather difficult and stopped hanging on their site years back.

Re: metal lathes

#4

What all do you want to do and what size.

Ray Thompson - Middletown,IN

>Enco markets one of the import 7 x 10's that works ok for small stuff. If you want to have some real fun find an old South Bend and make it what you want it to be. There are several machinists here so ask plenty of questions and someone will be around to help.

Ray

Re: metal lathes

#6

Re: What all do you want to do and what size.

Mark Kauder, Phenix City, AL

>Hi Ray, Long time, No Talk.

Do you know of any of the little (not super mini like the LV) combo machines that is good for the occational - not Aerospace tollerence - lathe and milling work? I did four years of HS Metal Shop a million years ago, but also had a secondary MOS in the Army as a machinest. I actually used that skill working for the Army Marksmanship Units Custom Gun Shop. There alway seem to be things that I would love to mill, but end up using a mini grinder and a file.

Thanks,

Mark

Re: metal lathes

#7

Re: metal lathes

Allen Neighbors

>Hello, Ed, Longtime, no-see. How's everything going? Miss your contributions to this site!

Allen

Sweltering, and love it, in Childress, TX

Re: metal lathes

#8

Re: metal lathes

Andy Blackwell

>I've had a Smithy for about six years and have enjoyed tuning it up. It is a great little combination machine that allows me to make a lot of tools to use in woodturning.

Try these sites for small lathe owners. They have links to a number of other sites and you can get an idea of the mods that owners make.

http://www.mini-lathe.com/Home/index.htm

http://www.bedair.org/9x20camlock/9x20project.html

Metal lathes are like woodturning lathes. Plan on investing significantly for accessories.

Re: metal lathes

#9

Re: metal lathes

john lucas

>Andy has it correct, the accessories will cost more than the machines. That's why I waited so long to buy one because I knew buying the machine was just the tip of the iceberg. I waited until I had the extra cash to invest in the the accessories. I just bought my Smithy for $1000 and have already spent $800 on stuff and need lots more. A good set of parallel bars will be my next purchase.

Re: metal lathes

#10

Re: metal lathes

eliot d

>ED, You really would loan it to me? You must be a true prince among men! I'd like to take you up on it so I can see what I really want. I'll call you. Thanks! ( If you decide to change your mind, I'll understand.)

Re: metal lathes

#11

Re: metal lathes

Pete in Holland, MI

>I have a 1922 South Bend lathe, 16" swing & 72" between centers. Bought it about 10 years ago for $300. Has a 12" 4 jaw chuck and aquired a 10" 3-jaw chuck. Has "slow-change" threading gears and does have some "personality" to it that needs to be overcome. Makes all the steam engine parts that I need for it to do, along with other odd items along the way.

Tooling will kill you. Keep your eyes open for estate sales or old tractor swap meets with the hopes of buying an older one fully tooled.

Good luck !

Re: metal lathes

#12

Re: metal lathes WARNING - My Gloat Now Begins

Clem Wixted, Jonesboro, AR

>I was at a yard sale while in NJ visiting my daughter and family. We went to a yard sale on Saturday and while at a sale with a lot of old car parts I asked the guy if he had a metal lathe for sale. He looked at me with a smile and said he had one in the basement that he wanted to get rid of. I looked and it was an older (Late 40's early 50's) Atlas/Craftsman 12 X 36 change gear lathe with nearly all accessories made for it except the taper attachment and tool post grinder. It had the milling attachment, all of the change gears, a 10 inch 4 jaw chuck, an 8 inch 3 jaw and a 6 inch 4 jaw chuck. The tool post had a couple of tool holders and a box full of cutter bits. The lathe had seen hardly any use and was a little oily because the owner didn't want it to get any rust. The oil had collected some dust. When I cleaned it up it looked like it came of the showroom floor, less some paint.

When I asked the price he said, Oh how about $100. I said "well, OK I'll take it." It took some doing to get it apart and into my car trunk for the 1100 mike ride back to Arkansas. Now I have to learn how to use it! :-)

I said all of that to let you know that they are available and if you have the patience and look around, you will eventually come across one.

Clem

Re: metal lathes

#13

Re: metal lathes WARNING - My Gloat Now Begins

eliot d

>You're killing me! What a find!

Re: metal lathes

#14

Re: metal lathes WARNING - My Gloat Now Begins

C.W.Stivison

>My neighbor gave me an old Blount lathe that has every thing you need to turn wood or metal. It is a neat old lathe but I am working on changing out the 3 phase motor.

Cw

Re: metal lathes

#15

Re: metal lathes

JKJ in East TN

>Eliot,

I'm zeroing in on a metalworking lathe and a milling machine.

At first I looked at the mini machines (7x14, etc) from China sold by a number of vendors, but a friend who has a couple of these and a larger lathe very highly recommends getting a larger lathe. He said although you can do plenty with the mini machines, the precision is better on the larger lathes and the increased motor power and capacity will make it SO much more useful. At the moment I'm looking at either an 11x26" or a 12x24" lathe (1 to 1.5 hp) and mill with 24" powered table travel and a 2hp motor.

In reading the mini-lathe web sites, it also appears that many people who initial buy a mini-lathe end up getting (or wanting) a larger lathe.

BTW, my friend said he uses metalworking machines often to make things from wood as well. In fact, I read an article in an old Fine Woodworking magazine about a woman who did all her woodturning on a metalworking lathe. She learned to coordinate the x and y controls to create smooth curves.

JKJ

Re: metal lathes

#16

I haven't personally used a combo machine

Ray Thompson - Middletown,IN

>But the Smitty has been around a long time for one. I suspect that most are made by one or two companies overseas and imported. I did go to the Grizzly store in Sprinfield last year and thought their metal stuff looked pretty good. We have a Wholesale Tools place in Indy that had a Jet metal lathe and a no name that was the same color, size, weight,labels, and half the price. If you have one nearby might check them out for their combo machine. You have enough of a background that you shouldn't have much trouble. If I can help in any way just holler.

Ray

Re: metal lathes

#17

Re: metal lathes

eliot d

>JKJ,

Perhaps, if you can remember, you can tell me which lathe you decided on when you get it.

Regards,

Eliot

Re: metal lathes

#18

Re: I haven't personally used a combo machine

Mark Kauder, Phenix City, AL

>Thanks, Ray

Mark

Re: metal lathes

#19

Re: What all do you want to do and what size.

john lucas

>Mark last time I checked Jet didn't have a combo machine but that doesn't mean they don't make one now. General Industrial supply in Nashville has factory rebuilt Jet metal lathes.

My machinist friend calls my Smithy a Kit lathe. He says it's a decent piece of equipment if you spend the time tuning it up. I'm trying to read up on what needs to be done to get it to higher tolerances. The guy I bought it from was trying to do some kind of work on his cars. He wasn't happy with the tolerance but when I got it you could tell he didn't know what he was doing.

I've tightened everything up and it does OK. I plan to take it all apart, clean and polish everything and then go through a tune up procedure and I think it will do some pretty good work. Probably not NASA tolerances but will probably do what I want it to do.

Re: metal lathes

#20

Re: metal lathes

john lucas

>John I believe that was Michelle Holzapfel who uses a metal lathe.

I had one of the 7x10 lathes. I did a lot of work with it but I don't recommend it. You have to take very small cuts and I never could get very tight tolerances with it. Using a decent lathe compared to the mini was like going from a HF cheapo wood lathe to the Powermatic. Everything about the bigger lathe works better.

Re: metal lathes

#21

Re: metal lathes

JKJ in East TN

>This is what I'm checking out at the moment - I'm trying to find someone who has used them and hopefully has written reviews:

Lathe:

http://www.grizzly.com/catalog/2007/Main/522

Mill: (the G1007 with var power feed)

http://www.grizzly.com/catalog/2007/Main/544

I'm still open to suggestion (trying very hard to be patient and do this right!)

JKJ

Re: metal lathes

#22

Re: metal lathes

Steve Worcester

>Look around and you should be able to find a used Southbend, Logan or Atlas for under $1000. My Southbend (9x36) is a newer one (1966?) and had to put about $200 in parts, but it works great. Parts are readily available, aftermarket tool posts and such are easy to get and even alot on ebay for it.

One thing that may be important to you is the size of the hole through the spindle. Mine is just over 3/4" which allows me to drill in the end of a 3/4" boring bar easily, but not a 1".

Re: metal lathes

#23

Re: metal lathes

Doug Thompson near Cleveland

>Take a deep breath, relax and think. You will outgrow a small machine in a hurry, it might even be the first day you use it. A small mill like that will give the same results as using your drill press with a cross slide table.

Metal working machines are expensive but they will last 40-60 years with just a little bit of care. There are many old small metal lathes available if you take time to look. Craigslist in the Chicago area just had a Atlas for a couple hundred bucks. Mills tend to be larger in size and adverage a 1,000 or so.

Check your local ads, craigslist, trade papers and once in a while a local ad on ebay. Shipping is very expensive so stay away from it. Metal working machines in good condition sell very fast so do your homework and be ready.

Re: metal lathes

#24

Re: Drill that boring bar on your wood lathe.

Al Crandall (N.E. of Indy)

>I drilled a 7/16" hole all the way through a 1.5" dia x 20" long piece of crs using my PM4224 and and a Talon chuck. E-mail me if you need particulars.

Re: metal lathes

#25

Re: metal lathes

eliot d

>Doug, I appreciate all the responses, but something tells me that your post has a special ring of truth about it. I think I'll take my time and get something larger.