Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Cover for PM 3520?

Posts

Cover for PM 3520?

#1

Cover for PM 3520?

david

>Our club purchased a PM 3520 for demos. Meetings are normally held at our local Woodcraft store, and the owner has generously kept the lathe in storage for us, hauling it out for meetings every other month. The lathe ways is getting pretty corroded and the entire unit could use some attention, some lubrication and perhaps even a cover. Is there a cover made specifically to cover this unit? Faced with potential rust, has anyone adapted another type of cover for this lathe? TIA

Re: Cover for PM 3520?

#2

Re: Cover for PM 3520?

Eddie Pacheco, San Jose, Ca.

>I would think a $40.00 motorcycle cover would work well enough to protect the lathe. I'll try one out on my lathe and post a picture soon.

Re: Cover for PM 3520?

#3

Re: Make sure the cover .....

Jamie Donaldson

>...is made of heavy cloth or canvas that can breathe - plastics will enhance the possibility of consensation that will make the rust situation worse. And you don't want to know how I learned this lesson!

Re: Cover for PM 3520?

#4

Why So Much Rust ? ? ?

Barry Turner

>Why so much rust? Is the location damp? Are the members not wiping away perspiration and wood sap? Oak and Walnut sap can be pretty corrosive. So can perspiration, if not wiped away. Are they lubing the ways before putting the lathe away?

I'd look into why the lathe ways are rusting so easily. Then I'd invest in a couple of cans of WD-40.

As for a cover, I'll bet the canvas cover I have on my Jenn-Air Grill would work.

Re: Cover for PM 3520?

#5

Hawaii has humidity like Florida and Houston...

david

>only most would agree much more beautiful. Certainly WD-40 would be used, but still should be covered as it does not get much use between meetings.