Wood storage?
Ed Moore
>Carole,
My shop is 24 x 30' and that is about right for the machinery and tools. What is also needed is space to store blanks that are drying, space for stock to be turned, space for the air compressor and dust collector, and space for finishing.
So, think about an L-shaped shop so that you can get good air flow in the long part of the L and the short leg can be used for the finishing and other needs mentioned above.
Having spent my misspent youth in Seaford, Delaware, which is not too far from where you live, the most important thing you can do is put a good heat pump in your shop. When we moved down to SW Virginia the shop was here, but SWMBO strongly suggested that I have a good heat pump installed. Bless that woman! Temperature is never an issue in the shop.
If you have a good dust collection system installed during construction, use PVC pipe and don't seal all the elbows, so that you would have access to any clogging that may occur.
A separate room for the air compressor and for the dust collector is a good idea. That room could also be the wood storage area, but not the finish room.
An exterior fan for the finish area would be nice.
Plan on room for a work station if painting and burning will occur. Another feature would be tables for when you are doing multiples of things. Right now I have a temporary table which is an assembly area for sea urchin ornaments and another for platters which are in various stages of finishing.
Think about what you intend to make, each stage of the processes, and then do what you need to do to make that easier.
Have fun,
Ed
PS: If building my dream shop. it would be bigger than 24 x 30, and probably L-shaped.