Re: Turning Thin.....
Wally Dickerman
>Thanks for posting this Steve. It's hard to do justice to a piece like this with just one photo.
Steve, I enjoyed meeting you and also wish that there had been more time to get acquainted.
Wally
Knowledge You Can Build On — Est. 1998
Re: Turning Thin.....
Wally Dickerman
>Thanks for posting this Steve. It's hard to do justice to a piece like this with just one photo.
Steve, I enjoyed meeting you and also wish that there had been more time to get acquainted.
Wally
Thanks for the pic Steve, and a side note.
Craig Daymon
>Mike Kehs teaches a class on creating thin vessels for the purpose of decorating similar to Bihn's (after having seen Bihn's demo). They are open vessels with straight walls and he uses a bowl gouge to go into the end grain to achieve the thin walls. It works great. The ever difficult turn at the bottom is a bit tricky, but other than that it's quite effective.
I would imagine you might be able to contact him via the AAW to get more info or have him demo for your group. (He also does wonderful inside-out turnings.)
-Craig
Re: Turning Thin
john lucas
>Raymond You have a valid question. I have talked to gallery owners who didn't like work that was too fragile because it's easily brocken. When they are putting a show together and the work requires assembly it can be an even worse problem.
I think you have to look at the individual piece. A $500 piece is not going to receive the same care and protection as a $5,000 piece. As you stated the proper environment will greatly enhance the longevity of a piece. Either way I'm pretty darn sure a 3/4" thick bowl will outlast a 1/8" thick piece. I don't remember who said it but some famous turner said remember it's going to look like barn wood in the long run.
When I am designing an "art" piece I look carefully at the overall design and try not to make really fragile pieces. However I don't want that to limit what I'm trying to say with the piece. I photographed a piece for a guy the other day that puts a whole new meaning to fragile. It was supposed to resemble how the brain put things together and had long very thin wooden supports for all the "electrical" parts. It was stronger than it looked but I'm talking 1/8 to 3/16" pieces that were 12 to 15" long. It's a special process he's developed that incorporates epoxy. Still as a gallery owner I would have to put that piece behind glass, and back to your original question. As a purchaser I would be concerned about the longevity.
Re: Turning Thin
Wally Dickerman
>James Prestini is credited with starting the trend toward thin turning as art in the 1930's. His work is in a number of collections such as the Mason collection. I've seen a couple of his pieces which were about 70 years old. They looked about as I imagine they did when they were new.
I don't know what there would be about thin turnings that would deteriorate any faster than heavier turnings. However, it's an interesting question that I guess only time will tell.
Wally
Re: Turning Thin
john lucas
>Wally I'll hang around long enough to check on yours in 50 years and see how they are doing. :)
Re: Turning Thin
Raymond Overman in SC
>It's interesting you bring up the Mason collection since I've seen part of that here in Charlotte. The environment there is a lot more preservationist than the average home.
It will be interesting to see pieces I've turned in fifty years. If I can live to be as old as my grandmother, I'll have to go searching through yard sales or probably the dump then.
Re: Turning Thin
john lucas
>That's what I'm shooting for Raymond. My pieces will be "discovered" by an archiologist studying the past through their trash and then I'll be famous. Maybe I'll get lucky and one my pieces will become a diamond in 10,000 years.
Re: Turning Thin
Fred Hatton
>My mother happens to have a peice that I turned 51 years ago. While
part of the peice is spindle turning it does include a bowl. It has
been well taken care of but nothing special and it looks as good now
as it did when new. Of course depending, that could be good or bad but the bowl is 3/16 thick.