>I know I've asked this before but I can't find my source. I need a good quality, indestructable lazar for my boring bar. I'm tired of the ones I have quitting on me. I know someone posted one sold by someone who makes tools but I can't seem to find it. I'm ready to order his and try it out.
Below is the original posting on Woodcentral: I just recieved and used it on one hollow form, the CP-TI-327-VBD. So far so good, I think this one will last. I wore out three cheap ones so far.
Subject: Re: laser light
Posted By: Jim Pugh, Elyria, OH jpug967@comcast.net
Date: Saturday, 17 February 2007, at 8:47 a.m.
In Response To: laser light (olejon10)
Gents, I highly recommend this site:http://www.calpaclasers.com/laser_pointers.html
Look at 'pointers' and I use the CP-TI-327-VBD. Have had it now for more than 5 years. They aren't cheap at ~$30 but you will only buy one. Also, if you look thru this site I think you'll find the aux. battery pack/110v variations.
Subject: Re: laser light
Posted By: Jim Pugh, Elyria, OH jpug967@comcast.net
Date: Saturday, 17 February 2007, at 9:41 a.m.
In Response To: Re: laser light (Jim Pugh, Elyria, OH)
If you go here: http://www.calpaclasers.com/laser_diodes.html#
you will find the apparatus to use a battery pack or a 3V power supply.
>john, i have noe purchased from best buy. used several years.uses two aaa batteries. cost something like 12.95 probably more now.i think only a hammer would harm it.
That's basicly what I did also after going through several lasers and dozens of batteries. I wired mine into a "D" cell flashlight and mounted it back a ways to get rid of some of the vibration near the switch.
>Andy that's the company I bought my last one from. It was $24.95 and I didn't even get to use it. I played with it about 3 times and it quit working and I've never been able to resurect it. I'm hesitant to spend more money with them.
>That "someone who makes tools" might be me. I have aluminum lasers that take a single triple A cell and the end twists to turn it on. It sells for $22.00
>I use a Calpac Lazer model CP-TI-327-VBD. After a year, I haven't been able to break it yet. The only trouble I have had is the battery compartment wants to unscrew, a piece of tape fixed it. The smaller version, CP-TI-327-3VB, looks to be about the same but I haven't tried it yet.
At the AAW Symposium in Portland I ran into John Lea and he gave me a laser to replace the one he had sold me earlier (which didn't work for very long at all). This one is great. I used it all day today and it works really well, is easy to turn on and off, and is very sturdy. It is the best one I've ever used. You might call John and see if he can order one for you. I haven't checked his website to see if he has them on there. If you need his email or phone you can email me. Hope this helps.