Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Slicing bologna.

Posts

Re: Slicing bologna.

#26

Re: Slicing bologna.

Gary Evans Tallassee, TN

>Hi Walt,

So far I'm not in a situation where a fire inspection is required. After reading your post, though, I'm certainly glad to see Wilford's comment. I expected that military spec. nylon would have a pretty good flame rating. Plus, we're not going to have any open fires in the room with the parachute ceiling. It was the pyrotechnics that started the fire you were referring to.

Thanks,

Gary

Re: Slicing bologna.

#27

Re: Fire

Gary Evans Tallassee, TN

>Thanks, Wilford,

I appreciate the info. I thought that government spec cargo nylon would have a sufficient flame rating, though I haven't researched it.

Gary

Re: Slicing bologna.

#28

Re: Wagner Safety Plane

Gary Evans Tallassee, TN

>Not a bad idea, Curly.

That was the reason I posted. I am looking for as many different options to choose from as possible. I'll certainly take a look at the cost of rosette cutters.

Gary

Re: Slicing bologna.

#29

Re: Slicing bologna.

Gary Evans Tallassee, TN

>You're right John.

No vacuum pump set-up yet, though that is coming. I agree that a vacuum chuck would be a great way to do this.

Thanks,

Gary

Re: Slicing bologna.

#30

Re: Slicing bologna.

Gary Evans Tallassee, TN

>Actually, John, I'm pretty sure I have one of those screw chucks. It might be ideal for this application because the screw is somewhat shorter than you see in some of the higher dollar screw chucks.

Gary

Re: Slicing bologna.

#31

Re: Slicing bologna.

Gary Evans Tallassee, TN

>No problem on the typo, eagle. I do it all the time.

While your method is a good one, I don't think I can make it work for me. I'm in a situation where I have less money than I have things I need to spend it on. Since I have a lathe and a bandsaw and a number of 6"x6" blanks, I was thinking about a method where I don't have to spend any coins. I have some lumber that I could make these out of, and may end up going that route. I just don't have as many different choices of wood if I use lumber than if I use turning stock.

Thanks,

Gary

Re: Slicing bologna.

#32

Re: Slicing bologna.

Gary Evans Tallassee, TN

>Hi Michael,

That's exactly the way I had envisioned it. I was just trying to decide if there was a quicker method. I may well end up doing it exactly that way. Still got a couple of days before I have to decide.

Gary

Re: Slicing bologna.

#33

Re: Wouldn't duck tape be easier??

Gary Evans Tallassee, TN

>Hi Russ,

Are you talking about using duct tape for hanging the parachute or to help with turning the pieces that I need?

Gary

Re: Slicing bologna.

#34

Re: Why not buy some shower rings?

Gary Evans Tallassee, TN

>Hi Ron,

Shower rings would be great if I had some shower rod to hang them on. 8^}

Since I'm trying not to buy anything I don't already have on hand, these guys will probably be made out of wood one way or the other. It's the one commodity that I have an abundance of.

Thanks,

Gary

Re: Slicing bologna.

#35

Re: Slicing bologna.

Wilford Bickel

>Gary,

I make my own thin blade parting tools using metal cutting blade stock in 1/8 and 1/16 inch thickness. I take cold roll round stock and cut a slit in the end then drill a hole and tap one side so I can insert a pan head screw and pull the slit area together to tighten up on the blade. The trick is drilling matching holes through the HSS metal cutting blades - the only bits I have found that will do that job are made by a company called Artu. I got mine by special ordering from Ace Hardware online and having them sent to my local store. A little pricey for drill bits but they are special use for such as HSS. I was making some new ones this weekend and will try to post pictures when I get the handles on if you need me to of the final product.