Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Grex Air Sander-Long

Posts

Grex Air Sander-Long

#1

Grex Air Sander-Long

Paul Coppinger

>In April, I took a platter class at John C. Campbell from Frank Penta and Alan Leland. Great class, great teachers, learned a lot and brought back 3 platters. One tip from Frank was to use a 5" random orbit sander to smooth the face of large platters. When a returned home, I wanted a smaller r-o sander to compliment the 5" so I ordered the Grex r-o air sander with an additional 3" hook and loop pad (2" included) from Packard Woodworks . Today, I finally got to use it on a platter. After about 20 minutes of use, I stopped to check my progress and when I tried to start it again, nothing. Air came out the exhaust but the pad did not turn. I checked the air supply, spun the pad but still nothing but exhaust air. I called Packard and spoke with Brad who, based on his air drill experience in a former life, suggested that the turbine might have stopped in a position that allowed air to flow through to the exhaust without turning the turbine. On the Grex, between the trigger and pad is a collet with a slot. By reaching in with the pad wrench, I was able to rotate the shaft slightly and I was back in business. Hope this helps someone else with their air equipment and thanks to Brad at Packard for his help.

PAC

Re: Grex Air Sander-Long

#2

Re: Grex Air Sander-Long

Jennifer@Indy.USA

>Paul, I have this same sander but have never experienced this. Thanks for the heads up in case I do!

Jennifer

Re: Grex Air Sander-Long

#3

Ditto -- thanks

Donna Banfield

>

Re: Grex Air Sander-Long

#4

Re: Grex Air Sander-Long

Steve Russell

>Hello Paul,

Thanks for the information... I have this same Grex sander but like Jen, I have never experienced a problem with it to date. Glad to know how to fix it though, if those gremlins pay me a visit. Take care and all the best to you and yours!

Steve Russell

The Woodlands, Texas

Re: Grex Air Sander-Long

#5

Re: Grex Air Sander-Long

Mike from St. Clair Shores

>Paul,

Thanks for the tip in case this ever happens to my Grex. I"ve had mine since the AAW symposium in Louisville and use it almost every day. You are going to enjoy working with it.

Mike

Re: Grex Air Sander-Long

#6

Re: Grex Air Sander-Long *LINK*

Juergen

>The local Harbor Freight has Item #93629 on sale for $19.99, normally $29.99. I already have the Grex, but got tired of switching between 2" and 3" the pads, so I took a gamble on this unit. After about 2 months of use it's holding up well with little difference in performance between the two.

Even though the HF item is not advertised as a Random Orbital Sander, it in fact is.


Harbor Freight RO Air Angle Sander