Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Chuck to buy

Posts

Chuck to buy

#1

Chuck to buy

bhenr99

>I have a Oneway chuck that uses the two bars to tighten it and want to get one with a t-handle. I have a Jet mini lathe and was looking at the Oneway Talon chuck. I see other brands of chucks and was wondering what would be the best chuck to get. Thanks for any help.

Bob

Re: Chuck to buy

#2

Re: Chuck to buy

TDaniel

>I like the Vicmarc best but the Grizzly is a close copy of it for half the price. I looked at a couple (Grizzly) that were brought to our club meeting and they looked good but I have not used one.

Re: Chuck to buy

#3

Re: Chuck to buy

Russ Babbitt Jr.

>The Talon is a good chuck. I would also look at the Vicmarc 3 1/2".

Re: Chuck to buy

#4

Re: Chuck to buy

Fog Tanner

>I have two Oneway Strongholds and two Vicmarcs, the 5 1/2" and the smaller lever operated VM90. My preference is the Vicmarcs, they are smoother operating than the Strongholds. I originally bought the VM90 for a threading jig, but now use it for all my box making and small bowls. I use it on both my Rikon Mini and my 24" Vic 300VL. For larger projects I still prefer the keyed chucks.

Re: Chuck to buy

#5

Re: Chuck to buy

Jim Swank

>You'll never regret buying the Talon, or at least not after you pay the bill.

Re: Chuck to buy

#6

Bill Blasic

Re: Chuck to buy

Bill Blasic

>The Nova G3 is a great little geared chuck.

Re: Chuck to buy

#7

Re: Chuck to buy

john lucas

>I would check to see if the jaws are interchangeable between the Talon and your chuck. If they are I would go with the Talon. I'm a Vicmarc fan. I have 2 of the vicmarcs and one of the Grizzly's. They are all good but the Vic's are noticeably better in quality.

Re: Chuck to buy

#8

Re: Chuck to buy

Russ Fairfield

>Don't forget that all of the jaws on the Oneway scroll chuck and the Talon are interchangeable. If you get another brand, a couple of the Nova chucks will be the only ones that use the same jaws mounting.

Re: Chuck to buy

#9

Re: Chuck to buy

David

>I have the Jet mini and bought the Nova G3. I've been reasonably happy with it. I was focused on the Talon and waiting for someone to put it on sale, but a vendor at the wood show was selling the G3 for $100 less than the Talon. Figured that "saving" bought me a bowl gouge!

Re: Chuck to buy

#10

Re: Chuck to buy

Bill Neddow

>You are obviously about to enter the world of the Multi-Chuck Owner's Society. If you do, be very careful to check out the direction in which the key turns to close and open the new chuck. Some of the ones from "down under" tighten in reverse. This may seem like a minor thing, but, if you are used to one system,. stick with it. If you mix them up you can have a very bad accident by giving the key one last twist to make sure everything is tight -- and actually loosening the grip!

Re: Chuck to buy

#11

Yep

TDaniel

>Bill, I had about 3 Vicmarc chucks when they decided to change the direction of tightening to make their chuck like the others. I did not know they were changing (even though I was a dealer for them at the time) and I added a couple more chucks to my collection. Half of my chucks tightened in one direction and half in the other direction; what a pain in the a_ _! I finally sold off my older chucks and ordered more new ones so that all worked the same way. You are SO right in your comment.

Re: Chuck to buy

#12

Re: Chuck to buy

robert davis

>I WOULD GET THE TALON IHAVE HADONE FOR SEVERAL YEARS NO PROBLEMS.YOUR JAWS WILL FIT THE TALON.

Re: Chuck to buy

#13

Re: Chuck to buy

C.W.Stivison

>I have a Nova G3 and a Jet Mini. The Nova Chuck is good but the key to tighten the chuck is hard to insert for me sometimes.And it tightens the opposite way.

CW