Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

pricing question

Posts

Re: pricing question

#26

Re: pricing question

Steve Russell

>Hello Carole,

You have wisdom beyond your years! As artists, we must see the value in our work, or we will project this to our buyers. You must have confidence in your work, or who will? Years ago when I first opened my studio, I hosted a private party for some collectors. I had priced my work at what I thought was a good price, but I second guessed myself quite a bit when I tried to come up with the prices.

Luckily, I had invited a few collectors that would ultimately become my best collectors. Three of them told me that my prices were too low (during a sneak peek before the party) for such fine quality artworks and that I should raise them significantly. With much trepidation, I quickly doubled and tripled the prices on the major pieces just as the main group of attendees was arriving.

Well, we sold out... The three collectors that encouraged me to raise my prices all purchased several of the major pieces and have continually encouraged me to raise my prices through the years. We have to get out of the mindset that limits the perceived value of our work. The market (buyers/collectors) ultimately are the best judges of the value of our pieces, as it's their money on the line. Take care and best wishes to you in all of your woodturning endeavors!

Steve Russell

The Woodlands, Texas

Re: pricing question

#27

Mike Stafford

Re: pricing question

Mike Stafford

>I do not disagree with any of the things you have said about how you perceive your work and how you value your work. But ultimately the most important thing about whether we sell our work or not is how it is accepted by the people who buy it.

If a highly skilled turner were to turn 10 identical in form pieces from 10 different pieces of wood ranging from the mundane to the exotic and place them for sale they will not all be perceived to be of the same value. The buyers will buy them for different reasons ranging from "This one will look good on the piano", to "I like cocobolo".

I have had the opportunity to be the proverbial "fly on the wall" at a gallery where some of my work is sold. I did not identify myself as the maker of any of the work being sold there when I was filling in for the owner. It was fascinating to hear opinions and reasons for buying or not buying a piece of work. These opportunities for unbiased opinions have been invaluable to me as I have no formal art training.

People mostly buy things because they like them....

Re: pricing question

#28

Beyond my years??

Carole Valentine

>LOL I am an old lady who gets dumber with each passing year!

Re: pricing question

#29

Need to Have vs Collecting

Jim Shaver - Oakville, Ontario

>100% with you Mike!

I used to do a lot of photography and would have shows in restaurants where my work would be on display for 2 months.

Some nights I would go there for dinner and listen in on the thoughts and opions of the dining customers, it was amazing what they thought and how the images impacted them...It's in their eyes.... it's an emotional need to want something, I really think I'd rather sell my work to some one like that than a "Collector".

Take care,

Jim

Re: pricing question

#30

all great thoughts and very interesting.

John Lucas

>I find the discussion on thinness of the piece interesting. My customers have often told me they prefer thicker pieces because of perceived fragility. I used to make a lot of thin natural edge bowls and my hefty bowls always outsold them. Of course that's my local market. I have a piece at home turned by Bobby Clemons. It's an extremely thin small Apple piece that's georgeous. People I show it to are afraid to even touch it. I like thin, I'm a woodturner, and it's fun to see how far you can go, but in my market it wouldn't change the value and might even hurt it.

Re: pricing question

#31

Re: pricing question

David Breth

>For my one and only craft show, I had this outstanding little walnut burl piece that was about 3" diameter, and I was going to crazy price it because I liked it a lot and figured I'd reluctantly sell it for significant money.

A week before the show, my mom and dad come over to the house and take a look at what I had made recently. If you're going to take that one to the show, consider it sold and tell me what you want. Well, I was going to want about $90, but for my father, who has helped me in so many ways time and again throughout life, that would be a "the next time you come over, remember to take it home with you."

I figure that sooner or later, hopefully much later, I'll get the little bowl back.

David B.

Re: pricing question

#32

I agree John

Rick Davenport

>I find woodturners' fixation on thin-ness mildly amusing.

I think your piece would lose a lot of character if you turned it thinner.

Plus you mentioned the soft spots that would probably help it explode by attempting to go thinner.

I have never had a customer say, "Gee, it's okay, but I sure wish it was thinner."

Especially on a natural edge, burly, barky, inclusiony piece.

By the way, for what it's worth, I would charge $80-$100 in my market.

Rick

(inclusiony??)

Re: pricing question

#33

Sure!

Brian Hahn in SW Wisconsin

>You're younger than me and I ain't old yet!! I figure another 25-30 years before I'm ready to be turned out to pasture.

Re: pricing question

#34

Grade 10 Metric vs. Imperial? Still confused...

DWR

>

Re: pricing question

#35

Thin is Good...

Wally Dickerman in Arizona

>Clear back in the 80's I became fascinated with thin turnings after watching Del Stubbs several times tuning his ultra thin pieces. Most of my work since then has been turned thin. If it's under 9 or 10 inches I strive for less than 1/8th in and usually 1/16th inch. My gallery people tell me that quite often people who buy my work comment on the thinness and buy partly because of that.

Wally

Re: pricing question

#36

Re: pricing question

Wally Dickerman in Arizona

>$20?...Don't even think that way...$100 is a very miniumum price for that piece.

Back in around 1950 I worked for a large department store. The store got in the very first portable dishwashers. On wheels, and to be hooked up to the sink. They bought a whole carload. I seem to remember that the price was $150. (remember, this was 1950) They didn't sell. After a time they took them off the floor and stored them. Several months later they ran a big ad with a price of $375. They sold them all. At the $150 price people thought theat they couldn't be any good....A selling lesson that I've always remembered.

Wally

Re: pricing question

#37

Re: Thin is Good...

Rick Davenport

>Wally,

I'm not saying thin is bad, I'm just saying some pieces look good thick.

Especially a piece like John's.

And I don't believe it undermines its value in this case.

Rick

Re: pricing question

#38

Thin Sells...

Wally Dickerman in Arizona

>Have you ever seen the ultra-thin work of Frank Sudol or Binh Pho or J. Paul Fennel or David Ellsworth? All of their pieces sell for prices well into the thousands. Well done, thin does sell.

Wally

Re: pricing question

#39

Keith Tompkins

Re: Need to Have vs Collecting

keith tompkins

>Hi Jim, I think it's important to remember that collectors are people too. Most fell in love with arts and crafts in their earlier years, and collect what appeals to them. Collectors do not buy because of price, they buy what really touches them in some way. Good collectors buy quality....ask any collector: would you buy one hundred mediocre pieces that are priced reasonably, or would you buy just one great piece for the same amount of money? Saavy collectors know good work will appreciate in value, and will therefore be a good investment.

Don't hesitate to send your portfolio to the best galleries in the country, and don't worry about their commission. They know their business, and will open doors you never dreamed possible.

Re: pricing question

#40

Re: pricing question

Ron in Drums PA

>Love it Wally.

I had a friend whose German Shepard had puppies. Both parent had papers so the pups where worth a few dollars. My friend decided he just wanted to give them to a good home for free. Not a single taker. I told him to place a $100 price on them and he did.

They all sold the same day and everyone thought they where getting as bargain.

When I was a kid I worked in a department store. After a few months of working there, the store was sold. The new owners closed the doors for one week and we where told to change all the prices. So we removed every single price tag with a new price tag that was 50% to 100% higher.

Meanwhile the owners ran fliers toting 25% to 35% off grand opening sale on everything in the store. I remember thinking that they where nuts. nobody is going to pay more, nobody is going to be fooled.

The opening day came and there was a mob. I never remembered the store being so packed. Merchandise was moving faster than we could restock the shelves. By the middle of the day many items where sold out.

Lesson learned.

Re: pricing question

#41

Steven Antonucci

The value of "good" maketing, huh?

steve antonucci

>