Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

NIP Bowl, Pictures

Posts

NIP Bowl, Pictures

#1

NIP Bowl, Pictures

Mike Rubes, Apex, NC

>Hi all,

Here's a translucent NIP bowl. It is about 7 across and 4.5 deep. The sides are very thin. Just over 1/16 of an inch think. I turned it wet and soaked it in danish oil, but still has some small cracks in the eyes. I might should have soaked it longer. Total soaking time was about 2 days. Finish on top of the Danish oil is just buffing with the Beall system.

The eyes in this piece were not in as even of a layer as others I have seen, but I sort of like the randomness of this one. Makes the piece look more organic to me. There is only a little spalting. I have one more blank of this stuff and I am going to let it sit and spalt a bit more before I do that one. I love the green coloring and wish this one had more. However, I needed it for a birthday gift and couldn't really wait.

Comments or critiques are always welcome.

Thanks for taking a look,

Mike










Re: NIP Bowl, Pictures

#2

Nice job Mike!

Dominic Greco in Richboro PA

>Mike,

Well done! Very nice overall shape. And I agree with you about the organic feel. It looks even better with teh light showing through it. Boy, your work has really progressed!And I can remember back when you first started turning! (sniff sniff!) :>)

See ya around

Dominic

Re: NIP Bowl, Pictures

#3

Re: NIP Bowl, Pictures

Thad Parker

>Wonderful looking bowl Mike. I also like the eyes more random.

I'm curious about the soaking in Danish oil. Is that typically used on NIP specifically, or is it commonly done with other woods as well?

Great Work

~ Thad Parker

Central GA

Re: NIP Bowl, Pictures

#4

Re: NIP Bowl, Pictures

david

>Agree that Mike did a nice job on this bowl. Watco Danish Oil, (Natural) works right out of the can, but you can also follow Russ Fairfield's menu in Russ' Corner, Finishing Secrets, and select item #7, Wipe-on Finishes. I have used the recipe for Submarine application with success. This calls for 1 gallon BLO to 2 gallons paint thinner or mineral spirits, and 1 quart high quality varnish. This amount works well in a 5-gal. pail, which I recommend using with a cover to keep wayward shavings and dust out. This would accommodate most average to medium-sized pieces. Soaking time varies, and some have said that it is the number of soak and dry cycles that count to bring out the translucence where the polymerized chemicals replace the wood cells.

Re: NIP Bowl, Pictures

#5

Re: NIP Bowl, Pictures

Jorge Castaneda

>Hi Mike

Nice shape and looks like the thickness is very even.

Somehow I remember a fellow saying that he does a number of cycles, submerge, let drip and dry until it gets translucent.

I have some white pine chunks around, I'll give it a try sometime

Thanks for showing

Jorge

Re: NIP Bowl, Pictures

#6

Re: Thanks all

Mike Rubes, Apex, NC

>Hi all,

Thanks for the nice comments. Thanks also to David for explaining the finishing process more. I think next one I will leave a little bit thicker, but try more applications of the oil.

Thanks again,

Mike

Burning burning burning in Apex, NC