Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

What do you use to remove Anchorseal?

Posts

What do you use to remove Anchorseal?

#1

What do you use to remove Anchorseal?

david

>I painted some end grain sealer on a nearly finished piece and was wondering what others use to remove the stuff other than sand or scrape it off. Thanks for your comments.

Re: What do you use to remove Anchorseal?

#2

Re: What do you use to remove Anchorseal?

Cyril Griesbach

>David, I'm guessing that you're going to remount and finish turn this piece so what ever tool you use should take off the wax. Also, I believe I've heard that mineral spirits will take it off but I'm not sure .

Re: What do you use to remove Anchorseal?

#3

Re: What do you use to remove Anchorseal?

david

>Thanks for the suggestion of using mineral spirits. The bottom was already sanded smooth and the Anchorseal was applied to get a better suction on the vacuum chuck. Was looking for something that avoided further sanding or minimized any kind of scraping.

Re: What do you use to remove Anchorseal?

#4

Re: What do you use to remove Anchorseal?

Peter Teubel

>Plain old hot water will also remove it. In the future, you might want to use a coat of whatever finish you are using to get a better vacuum seal.

Re: What do you use to remove Anchorseal?

#5

Re: What do you use to remove Anchorseal?

Mark Mandell - Gone Round In Jersey

>Since Anchorseal is an emulsion, the emulsifier remains in the wax film. Most of it will come off with a hose, but a little soap and water will remove it completely. Powerwasher is quick if you have one.

Re: What do you use to remove Anchorseal?

#6

Re: What do you use to remove Anchorseal?

Jimmy Edwards

>My wifes hairdryer works real well. However very risky. Cutting torch works too. A little heat and it runs.

Re: What do you use to remove Anchorseal?

#7

Thanks to all for your comments!

david

>

Re: What do you use to remove Anchorseal?

#8

Re: What do you use to remove Anchorseal?

Steve Worcester

>The other problem you may run into is the finish. Since it is a wax, without completely removing the wax, including what has soaked into the pores, you can only use a wax finish over the top.

Acetone will most likely remove the top coat, but is a fairly volatile way to do it.