Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

1/4" Drill Rod on Tool Rest

Posts

Re: 1/4" Drill Rod on Tool Rest

#26

Re: By the way

Allen Neighbors

>I looked for some HSS rod in 12" lengths, but couldn't find 1/4 or 3/16 in that length. two of my toolrests are 12", so I didn't want to splice it.

Re: 1/4" Drill Rod on Tool Rest

#27

Re: Probably not

Mike Cunningham Cape May NJ

>Great idea thanks.......

Re: 1/4" Drill Rod on Tool Rest

#28

Leo Van Der Loo

Re: 1/4" Drill Rod , 6" rest setting up

Leo Van Der Loo

>I thought that might happen, Allen, unhardened drill rod is fairly soft, you can file it.

I don't think your oven is hot enough to harden the drill rod, but yes you could temper it in there probably, if you think that's necessary, I would just harden it and epoxy it on, there's no problem doing it that way, as far as I'm concerned, and you'd have a hard surface.

Have fun and take care

Leo Van Der Loo

Re: 1/4" Drill Rod on Tool Rest

#29

Re: Question, Leo.

Allen Neighbors

>How would you harden it?

Re: 1/4" Drill Rod on Tool Rest

#30

Leo Van Der Loo

Re: Question, Leo.

Leo Van Der Loo

>Hi Allen

Don't know what all you have available, but get it red hot one way or another, (flame, fire, electric welder) then if you want to go with oil, a pipe capped on one end filled with oil (old oil will do just fine) drop the rod in there and it is hard, I probably would just drop it in a tray with water, like I said before, we are not making a tool bit that has to hang out over an edge (tool rest or in a holder in a lathe etc.) and where you would not want it to be to hard and snap off on you, the rod you are making is going to be supported over its whole length, with the tool rest under it.

Of course when you are at this point, and you'd prefer to anneal it, you could do this in your oven, however I see no reason for it, it's up to you to decide, what have you got to loose ?? but a small piece of rod if somehow managed to break it. That's the way I see it.

Have fun and take care

Leo Van Der Loo

Re: 1/4" Drill Rod on Tool Rest

#31

Excellent idea. Robust now has a ...

Ed Moore

>toolrest with a drill rod attached. Brent English sent me a prototype to try out and it worked great. I think that will be the style he supplies with new lathes.

Great idea, Allen. I'm glad that you and Brent each thought of it. I may try it on my rest for the Oneway 1018. I'm a believer in PC7.

Ed

Re: 1/4" Drill Rod on Tool Rest

#32

Re: Question, Leo.

tek-Brunswick, Ohio

>Use vegetable oil The fumes are not toxic then. Peanut or Olive Oil are supposed to work well.