Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

stumped by tear- out

Posts

Re: stumped by tear- out

#26

Re: Thanks Jorge, and Joaz... but...

Allen Neighbors

>what was it's intended use?

Joaz, I searched the archives, found your posts and pics, and have copied and pasted it all into a file for my shop notes.

I've worked with wood for 49 years, and have never seen one of these.

Your's are the first.

Re: stumped by tear- out

#27

Re: Thanks Jorge, and Joaz... but...

Jorge Castaneda

>Allen,

With an out cannel you carve out concavities, like a bowl, with the in cannel you can turn them into a cylindrical hole.

Re: stumped by tear- out

#28

Re: stumped by tear- out

eliot d

>Hi Russ, Yes , it is very dry Norway maple. I'm afraid that some of the responders must think that I have no idea about supporting the fibers as I cut; that's just not my problem. When I said I was stumped, it was because I had tried everything to no avail. I'll get out the 60 grit Norton sandpaper on this one.

Re: stumped by tear- out

#29

Re: One more idea...

eliot d

>I haven't heard about this one. I'll try it before getting out the 60 grit. Thanks

Re: stumped by tear- out

#30

Re: Thanks for your patience, Jorge. :o)

Allen Neighbors

>