Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Mesquite, Coccobolo, and Chechen Peppermills

Posts

Re: Mesquite, Coccobolo, and Chechen Peppermills

#26

Email sent off

Dominic Greco in Richboro PA

>John,

I just took some pictures of my photo set up and have emailed them to you. Thanks for the advice.

See ya around,

Dominic

Re: Mesquite, Coccobolo, and Chechen Peppermills

#27

Re: Mesquite, Coccobolo, and Chechen Peppermills

Mike Brazeau

>Hey Dom - these are really nice. I really like your idea of the coaster. I have guts for a couple of mills sitting on the shelf and must get to them one day. As Jim Shaver has said above, I made a triple point from a shock absorber shaft and love it. Made a 1/4" version recently but haven't done much with it. Keep up the great work.

Mike

Re: Mesquite, Coccobolo, and Chechen Peppermills

#28

Thanks Ron!

Dominic Greco in Richboro PA

>

Re: Mesquite, Coccobolo, and Chechen Peppermills

#29

Re: Mesquite, Coccobolo, and Chechen Peppermills

Dominic Greco in Richboro PA

>Hi Mike,

I had these darn pepper mill mechanisms sitting in my tool cabinet for almost 4 years! I bought a couple dozen and only made about half of them. Over the past year I started making them again. Now that I've found a more efficient process (for me anyway) of turning these peppermills, I'll most likely upgrade to the better mechanisms (like the crush grind or stainless steel ones).

I remember you talking about that 3 point tool you made out of the shock absorber. If I remember correctly, you gave me some guidance when it came time to make mine. I have to say, it's one of the handiest tools I've ever used.

See ya around,

Dominic

Re: Mesquite, Coccobolo, and Chechen Peppermills

#30

Hi Mike

Dominic Greco in Richboro PA

>Mike,

Thanks for the complements my friend! And I hope to see you at Bill's this year as well.

Remember that chunk of milo you gave me several years ago? I finally cut up some more I had laying around and made some easter eggs out of it. They look just like dark chocolate!

See ya around,

Dominic

Re: Mesquite, Coccobolo, and Chechen Peppermills

#31

I hear that !

Dominic Greco in Richboro PA

>Jennifer,

Thanks for the compliments! And I hear you about the work involved. It was only through doing a couple dozen that I learned the real secret. Batching all the similar operations is a good thing. But some operations need to be done sequentially. Like drilling all the holes.

I found that you can rough all the blanks to cylinders, and then part off the all the tops from the bottoms. The next step is to take (1) set of tops and bottoms and dill the 2 different sized holes in them (1/4" thru hole in teh top, 1" thru with 1 1/2" counterbore in the bottom). The trick is; don't try and drill all the 1" holes in all the blanks at once. It will break the flow. Complete 1 set at a time. After drilling, turn one set at a time. You get a much better work flow and you finish one peppermill completely instead of having 3 mills that are all in the same stages of being incomplete!

Once I got going, it was so much easier to make them this time, that I'm buying more mechanisms as soon as I can. This is from a guy who swore off turning peppermills 2 years ago! :>)

See ya around,

Dominic