Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

turning tool holder

Posts

Re: turning tool holder

#26

Re: But we can tell you never use it. :o)

Allen Neighbors

>

Re: turning tool holder

#27

Re: BTW, nice setup, too!! :o)

Allen Neighbors

>

Re: turning tool holder

#28

Now maybe turn the lathe around.

Norm Smith in Nova Scotia

>

Re: turning tool holder

#29

Calipers...

Peter Teubel

>I do a fair amount of spindle jobs. Having a set of calipers for each major (and minor) diameter let's me part down to the size required very quickly.

I got a killer deal on eBay. Almost all the calipers are Brown & Sharp brand. Superior fit & finish as compared to the imported stuff. Got them for about $5/pair.

Re: turning tool holder

#30

Nice looking

john lucas

>Did Lionel Hampton desing that. It looks like a you dissassembled a set of Vibes.

Re: turning tool holder

#31

Re: Here's my setup

Barry Turner

>That's much too neat and orderly. Not a wood shaving or speck of sawdust in sight. Nice system for storing/displaying tools.

Re: turning tool holder

#32

You must be a big fellow with long arms...

Ken Grunke from SW WI

>I wouldn't be able to reach any of the tools from the front of the lathe with this setup.

I keep my tools in a bucket nearby or on a wheeled cart. Each tool has a unique handle shape, style and color for easy ID. They have to be right within reach for me but I can see how your method makes sense if you just grab what you're going to be using from the rack before starting a turning session.

Re: turning tool holder

#33

It has to be said, "You must be nuts."

Russ Fairfield

>That is my opinion of anyone who stores their tools on the wall on the other side of the lathe.

Loose clothing and spinning wood in close proximity are always a bad combination. I don't understand why anyone would encourage their meeting. Yeah, I know. You ALWAYS turn the lathe off before reaching. I know of more than one woodturner who said that, but has permanent body scars to prove that they forgot at least once.

Re: turning tool holder

#34

I Agree.....

Wally Dickerman in Arizona

>

Re: turning tool holder

#35

Re: It has to be said, "You must be nuts."

Troy German

>Russ,

Thanks for the warning. I've been thinking about hanging my tools on the wall behind my lathe (it's such an inviting spot). I'll think twice now.

Troy

Re: turning tool holder

#36

Accidents Happen...Or Not....

Wally Dickerman in Arizona

>It used to drive me nuts to watch Rude Osolnik turn wood while wearing a string tie....But then, when woodturning, Rude could walk on water without getting his feet wet.

Wally

Re: turning tool holder

#37

Here's mine

Bob Fawcett

>Just a plywood box with no bottom. Holes drilled for the tool. I started out with names for the tools, now that I have started making my own handles I don't need the labels as much.


img

Re: turning tool holder

#38

John's lathe does not sit idle *LINK*

Ken Grunke from SW WI

>OK, John has been run through the mill a wee bit here but if you go to his website, it's obvious that his lathe gets put to use!


Pieces of Wood

Re: turning tool holder

#39

Re: My post was tongue in cheek,

Allen Neighbors

>and I think most of the others were also. I'm always getting digs for how clean my lathe is... just thought I'd pass it around. :o)

I did check out his site. He does have some nice stuff, and at pretty reasonable prices, too.

Thanks for posting, Ken. :o)

Re: turning tool holder

#40

Re: You must be a big fellow with long arms...

John Carr

>Big guy? Not me. I'm just a growing boy - 6'-3" and 250 lbs, and yes, I do occasionally reach across the lathe while it's running. I live and work alone, so I'm REAL careful.

The lathe is actually mounted on timbers to get it up to the height I like to work at. The picture was taken the day I got the lathe up and running. Since then, I've added a 2x12 shelf to the base with 300 pounds of sand, added one more 2x4 layer to the timbers to get it even higher, and added several hundred pounds of wood shavings to the floor.


img

Re: turning tool holder

#41

Re: My post was tongue in cheek,

Ken Grunke from SW WI

>Hi Allen, sorry, didn't mean to single you out with my message, just thought it was a good thing to do.

BTW, I looked up emoticons on one of the godzillian bobdylian websites that list them, and the one you used was for a clown (or perhaps clownin' around, as in just kidding). But it's supposed to have a pointed hat like so: <:o) and perhaps even a tassle, and a wink: *<;o)

The ones I found to signify tongue-in-cheek were :-J and :-?. I've never used these but always improvised with my own version, :`] with the little "tick" being the tongue.

*<;o)

Just clownin' around...

Re: turning tool holder

#42

Re: turning tool holder

Don in Northern Arizona

>Bob,

Better late than never. Here are my 3 turning tool holder solutions. The small hanging rack on the left with mini tools hangs on a small turned knob and can be moved to my Carbatec if I ever find a place for it. The main 3 piece rack holds turning tools and calipers behind the lathe. Then I have the five tool rack that fits into the lathe bed on the right for tools I am currently using.

Don


img

Re: turning tool holder

#43

Re: turning tool holder

Carlos Cabrera

>I like your tool racks a lot. Thanks for posting the picture. I was also wondering what type of lathe is in the picture and your thoughts about it since I am looking to buy a new lathe, I am just not ready to buy the Mustard Monster yet.

Carlos

Re: turning tool holder

#44

It's a junior Mustard *LINK*

Don in Northern Arizona

>Carlos,

It is a Jet 1642 which uses the same legs as Powermatic 3520 and has a similar variable speed system, but is a bit lighter and quite a bit cheaper. Dominic Greco has a great review of it in WC Articles which convinced me to buy it. Follow the link below.

Don


Dominic's Jet 1642 review

Re: turning tool holder

#45

Re: My post was tongue in cheek,

Allen Neighbors

>Don't worry about singling me out... anytime, Ken... I'm thick skinned. Thick-headed, too, evidently... I always thought :o) was just a smile, and didn't know about any others. I used to use this, because I wear a beard :o)>

Probably means something else.

Re: turning tool holder

#46

Re: turning tool holder

Bob Haines

>Don -

this is exactly what I am looking for! If you don't mind, I will freely copy.

Thanks,

Bob

Re: turning tool holder

#47

Re: Mine too, John, point up.

Jimmy Edwards

>Allen did you use that great big tool on the left to make that iddy bitty lidded box sitting on top of the rack?

Re: turning tool holder

#48

Re: Mine too, John, point up.

Allen Neighbors

>Nope, that's not an iddy-biddy lidded box :o) those are homemade wooden faceplates... but I did use it to reach the bottom inside of a 14" black walnut vase for my Sweetheart. :o)