Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

OT- Why my lathe got dusty

Posts

OT- Why my lathe got dusty

#1

OT- Why my lathe got dusty

ChuckS

>As a poor working stiff, I only seem to have time for one obsession at a time. This is what I've been working on for the past 15 months of shop time.

The hull is 4mm okoume ply, sheathed in 6oz fiberglass & epoxy. The deck is 1/4 western red cedar, with 4oz glass. Trim pieces are either carbon fiber or cherry.

I'm a avid (rabid?) paddler & plan to take her on multi-day trips to Lake Superior, Georgian Bay, and wherever else I can sneak out to.

Maybe now I can make friends with my lathe again!!

ChuckS


img

Re: OT- Why my lathe got dusty

#2

Re: OT- Why my lathe got dusty

John Veerkamp

>Beautiful, looks like fun.

Re: OT- Why my lathe got dusty

#3

Re: OT- Why my lathe got dusty

john lucas

>Beautiful. I have a good friend in Huntsville that makes kayaks in his apartment. Don't ask me how he does it. I know he uses a jig saw and hand plane and he does the fiberglass on the back porch.

Re: OT- Why my lathe got dusty

#4

Brad Vietje

Cool ! Now you need an ICEBOAT !

Brad Vietje

>

Re: OT- Why my lathe got dusty

#5

Re: OT- Why my lathe got dusty

Gary Evans Tallassee, TN

>That is gorgeous. We used to kayak a lot. I used to turn a lot.

Now I don't kayak or turn. At least not at the moment.

Gary

Re: OT- Why my lathe got dusty

#6

Bob Moffett

Re: OT- Why my lathe got dusty

Bob Moffett

>That is a gorgeous kayak. I have some friends that kayak and really enjoy it.

Re: OT- Why my lathe got dusty

#7

Re: OT- Why my lathe got dusty

Robert D. Macgregor

>I hope that picture is a cut 'n paste job. Otherwise, it looks like there is a bit of a problem with the stern... or maybe this is the latest trend in boat design?

Re: OT- Why my lathe got dusty

#8

Re: OT- Why my lathe got dusty

don lewonczyk

>I'm not a boatsman but is it the bow in the picture that looks out of whack? I always thought the stern was the back of a boat, don't know myself thats why im asking. Beautiful job, looks like a sleek running machine. DonL

Re: OT- Why my lathe got dusty

#9

Thanks guys!

ChuckS

>The boat is true, but I'll be the first to say it's a rotten photo. I had to snap a quick shot before we loaded up & headed for a burger. Must have priorities!

Bow = front (pointy end)

Stern = back (the other pointy end)

Re: OT- Why my lathe got dusty

#10

Re: Thanks guys!

Phil Powell

>WOW! Your kayak is gorgeous! Well worth a little dust on your lathe.

Re: OT- Why my lathe got dusty

#11

She's a Beauty !

Ruth Niles

>Makes me miss my kayak, I had to sell it when I moved, not much kayaking in Amish farmlands. : )

Re: OT- Why my lathe got dusty

#12

Roger in MO

Re: OT- Why my lathe got dusty

Roger in MO

>Fantastic job. And it will be even more fun to use.

Some years back, when our scouts made Eagle, we helped them build a 15' kayak with an open 5 foot long cockpit. We floated South Missouri streams. One group also floated two days on the Missouri River. Those kayaks were a bit crude,in no way comparable to yours, but they were a motivation and a reward for the boys who attained their eagle award.

Re: OT- Why my lathe got dusty

#13

Barb Siddiqui

That's just gorgeous!

Barb Siddiqui

>

Re: OT- Why my lathe got dusty

#14

Re: OT- Why my lathe got dusty

Michael Foster

>Nice kayak!!

I did a fair amount of kayaking in Alaska and at one point got plans and an urge to make a strip kayak. Never happened. Mostly because my shop at the time was 18' long, and the kayak was 19' long, so it just got put on the back burner and never got made. I can appreciate the time an effort building your boat (and why you have not been turning), but it will all be worth it when you're on the water. Did you reinforce the bottom with kevlar or the like for beaching on rocky ground?

Re: OT- Why my lathe got dusty

#15

Beautiful!

Ron in Drums PA

>

Re: OT- Why my lathe got dusty

#16

Dick Hines

Re: OT- Why my lathe got dusty

Dick Hines

>I can't beleave you are going to put that in some dirty old water. It should be hanging on a wll some place.

Re: OT- Why my lathe got dusty

#17

Re: OT- Why my lathe got dusty

ChuckS

>The bottom of the hull is 2 layers of 6oz glass. Kevlar is tough, but it's a yucky yellow, impossible to sand, and difficult to repair if somehow I manage to hurt it. The 2 layers of glass should be plenty tough, and really simple to fix if needed. The ends are capped with cherry and 3 layers of glass, so hopefully TOUGH.

Re: OT- Why my lathe got dusty

#18

Re: OT- Why my lathe got dusty

Bill Crommett

>Chuck: A gorgeous job. A question I posed a number of years ago to the editors of Wooden Boat Magazine as to why Okoume plywood instead of some other kind of playwood ? I never got an answer, but maybe you can give me the opinion of the experts.

Bill

Re: OT- Why my lathe got dusty

#19

Re: OT- Why my lathe got dusty

Barry Turner

>That is absolutely beautiful! You're NOT going to get it wet are you?

Re: OT- Why my lathe got dusty

#20

Re: OT- Why my lathe got dusty

ChuckS

>Wet?

I made it to fight with rocks! I plan to use this boat for camping trips- most of the places I'm going have no sand, just rock. One of the beautiful things with epoxy & varnish is it's much tougher than it looks, and is super easy to fix.