We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Practically all the pictures I see of finials are made of ebony or ebonized wood. I like to use North American hardwoods and ebony is not one.
I've tried maybe a dozen or so finials and launched them all as UFOs! I finally finished a small one of mesquite today which I will post later when everything is dry and can get a picture. So, what is it about ebony? Is there some unwritten rule about ebony finials? Thanks........Ron
>Ebony, being very $$$ is used in small pieces. The black to whatever color contrast is very striking. The straight grain, strength, and hardness lends itself to finials well. African blackwood is almost as good.
>There have been a lot of finials made from Walnut and other woods besides Ebony and Blackwood. Regardless of the wood, all finials require a sharp tool, a light touch, and minimum holding pressure from the tailstock. It is important that the tail-center be free spinning. The torque required to turn a stiff center is transferred through the wood. The spindle gouge or skew should be sharper than it has ever been before, and working the edge to razor-sharp is a requirement. Again, lower cutting forces on the wood will allow smaller diameters. Other than that, finials take a lot of practice.
The wood grain is also important. The best grain is close and straight. This is no place for 1/4 grain or burl.
The "thing" about Ebony or Blackwood is that they are a very hard and strong wood with long and close straight grain. That means they can be turned down to very small diameters without breaking, and that they will take detail very well without chipping sharp corners. The other things are that the detail shows better in a dark wood, and that most people just like dark finials better than those from light colored woods.
>See if you can get your hands on som TEXAS EBONY. It is a close cousin to mesquite, and goes by the name of Monkeys Earing or Apes Earing. It is very dense and very dark, sometimes with some wisps of gray...sapwood is creamy in color.
Personally, I think that finials are overdone. When I use a finial (whether it be the same or a contrasing wood, I want to otherwise enhance the piece. I have seen so many works here and elsewhere that are, in essence, a finial with a tiny box under it. Just my opinion.
>Ron I never use ebony. OK maybe once. I like to have a finial that contrasts with the wood or at least the color goes with it. So on light woods I might use something like Cherry, purple heart, paduak, walnut, Wenge etc. On dark woods I often use something really light like maple, Holly, yellow heart or some other nice wood.
>Hi Ron, Black goes with pretty much everything, where other color combinations may or may not work, with some being absolutely garish. Selecting complimentary wood colors takes some planning and thought. I often hold one end of a finial in a chuck, the tailstock then only serves as very light support. A line of black between two colors can help tie a piece together. This may help.....
>Whew! If I wanted a finial like that I'd have to buy it! Good explanation and good illustration. Guess it's back to the lathe again and keep on keepin' on! Thanks.......Ron
>Hi Ron, try a dry, hard, piece of Persimmon for a finial. Persimmon is in the Ebony family (Diospyros), takes a fine polish, and can be dyed black if needed.
Based on our recent email exchange you know why I am interested in this discussion. But come-on, Buddy!!! The print is too small for me to read in your picture - damn getting old.
Do me a favor and either repost this a little bigger, even at a lower resolution, or email it to me.
>I have been struggling with finial's for years until i bought Cindy's DVD. She make's everything clear and takes a lot of the mystery out of the process. I highly recommend her techniques.
>Hedge or osage orange turns really well when making finials IF you like the color with the vessel or is as suggested it is dyed or colored in some way.
I turn finials separate from the vessel. The tenon is formed on the tailstock end of the stock lto fit the vessel and then I work the small end toward the headstock. Probably unorthodox but seems to work for me.