Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Epoxy color/fill tip (Longish)

Posts

Epoxy color/fill tip (Longish)

#1

Epoxy color/fill tip (Longish)

Mike in Shreveport/Bossier City, LA

>I have been looking for that holy grail of epoxy filler that will add color without compromising the strength or cure time of the epoxy. I think I'm close. I have found that the embossing powder scrapbookers and rubber stampers use will mix extremely well and the epoxy is just as strong as if nothing was added, cures in normal rated time, and only thickens the epoxy a little bit. It doesn't take much to get the vivid colors I was looking for. Plus, it's a bit cheaper than the dyes and whatnot. I found some on clearance for $1.79. It comes in a very broad range of colors, both sparkled and not and is readily available at just about every local craft store out there. It really seems to be perfect. As a bonus, it's nowhere near as hard on tools as the stone materials also used for inlay.

Also, just a side note, Hobby Lobby carries in their model (not glue) section, one ounce containers of CA glue for $4.99, in thin, medium, and thick. It seems to work just as well as Hot Stuff, especially if you are waiting on an order for more of your glue of choice and really need some to tide you over, it's just a drive away for some people.

Mike

Re: Epoxy color/fill tip (Longish)

#2

Re: Epoxy color/fill tip (Longish)

Brian Hahn in SW Wisconsin

>Mike,

What brand of embossing powder did you use? I've tried a few and I've been less than thrilled with the color intensity.

Re: Epoxy color/fill tip (Longish)

#3

Just out of curiosity Mike....OT

Randy Johnson Connersville, IN

>Are you by any chance at BAFB a.k.a. BAD?

I knew people who said they lived in Shreveport, and I knew people who said they lived in Bossier City, but the only time I ever heard the reference Shreveport/Bossier City was when the base was being discussed.

Admittedly, that was a time in my life when the overconsumption of alcohol was a large part of my existence and there are probably LOTS of things that slipped by me.

I still remember how ticked some of the locals got when Howard Cosell broadcast the fight between Tim Dement and a convict when they were both trying out for the 72 Olympic team. He kept saying Dement was from BaasEEer City.

Re: Epoxy color/fill tip (Longish)

#4

Re: Epoxy color/fill tip (Longish)

Mike in Shreveport/Bossier City, LA

>Brian,

I'll have to check when I get back to the house tonight. I used a decent amount of embossing powder even though it didn't put a dent in how much I had left. I'll let you know but I got it at Michael's and it was in a jar-type, clear plastic container with a screw on lid. I used sparkled blue for my first attempt and have since gotten more in other colors to try.

Mike

Re: Epoxy color/fill tip (Longish)

#5

Re: Just out of curiosity Mike....OT

Mike in Shreveport/Bossier City, LA

>Randy,

I'm at BAFB but only for work (Barksdale Air Force Base for the uninitiated). I actually live in Haughton since I didn't want to live on base. No one really knows about Haughton so for messageboards and other such things I just say Shreveport/Bossier. I don't mind the area but I do miss the Emerald Coast of Florida where I was stationed last (I used to be Mike in Fort Walton Beach, FL and then I was Mike in Navarre, FL).

Mike

Re: Epoxy color/fill tip (Longish)

#6

Re: Just out of curiosity Mike....OT

Randy Johnson Connersville, IN

>I had a friend in the heat shop (we were CES) that married a girl from Haughton. I'm not sure I knew her last name even back then. His name was Paul Oyler.

I've checked the base out on Google earth a few times and am always surprised at the changes over the years - particuarly since a lot of the buildings have been there since the thirties.

One thing that surprised me was the distance from the rifle range to the Q area. I thought it was a lot farther. I don't know if you have ever been to the range but it seems like it would be impossible to get a bullet past the backstop. Nonetheless, it was common knowledge that it was downright dangerous to be in the Q area when the range was in use. I still have an M-16 slug with rifleing marks on it from that I picked up on one of the roads inside the fence.

I also remember the area being a good place to see venomous snakes in their natural habitat.

Re: Epoxy color/fill tip (Longish)

#7

This brings me back too...(OT)

david

>Someone said that the one common element that people of my generation will have is the shared experience of military service. I was a Programs Branch officer in the Civil Engineering Squardron (CES) at Carswell AFB in Ft. Worth, which I understand was part of a base cutback program. What Barksdale and Carswell had in common were the wings of B-52 bombers stationed there. We used to get visits from headquarters 2AF personnel from Barksdale, and while my contact was only through reports sent to HQ, I will always associate Shreveport with BAFB.

Re: Epoxy color/fill tip (Longish)

#8

Re: Epoxy color/fill tip (Longish)

Mike in Shreveport/Bossier City, LA

>Brian,

The first brand I used is Stamp-N Stuff from Michael's craft store. The color is blue tinsel. On another note as well, the powder appears to be perfect for the CA fill method as well. Just add a little powder, then add a little thin CA, then add a little more powder, etc... Usually, I use medium CA as the last coat to soak into the powder. I think it's less brittle and gives a higher shine when you sand it. Also, it doesn't seem to be as succeptible to the heat of sanding compared to the thin stuff. I'm still learning and experimenting with all this though. Hope it helps!

Mike

Re: Epoxy color/fill tip (Longish)

#9

Thanks Mike.

Brian Hahn in SW Wisconsin

>

Re: Epoxy color/fill tip (Longish)

#10

Re: Epoxy color/fill tip (Longish)

Bob Edwards

>Hello Mike, My wife is a rubber stamper and I have been aware of embossing powder for some time but I have been playing with something else as well, baking soda and acrylic paint. Yes plain old Arm & Hammer.I use just enough paint to get the desired color and let the soda dry. you can leave it in a flaky form or grind it into a fine power. I find the easiest application is to fill the void with the soda and apply a thin set CA glue. The soda will wick up the glue and harden almost instantly. It cuts clean and sands and polishes. Like thye embossing power you have an unlimited range of colors.

BTW Never been stationed at BAFB but am retired AF, 23 years

Bob Edwards

San Antonio