Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Signing work

Posts

Signing work

#1

Signing work

Mikefrom Tn.

>I read the post on signing your pieces. I always have people ask me why I don't sign my work. Has anyone tried a branding iron? I've seen them in several publications and have hesitated buying one because of the price.They look easy enough. Is it because of the personal touch, or because of a marketing aspect.

Re: Signing work

#2

Re: Signing work

john lucas

>Mike, the brand has two problems for me. One is the impersonal feel and the other is the size. You might be able to get it made so the signature is small enough but will it reach into all the areas you might want to burn a signature.

I think most people can sign with a decent signature with a pyrography pen, Dremel engraver, or permanent pen if they just practice. My handwriting sucks but I've worked on my signature. Russ said it right earlier. With any of these writing tools a light touch is key to making a good signature. I might add figureing out how to hold the piece so you are writing in a more or less normal manner. For me this means holding the smaller work near the workbench so my arm and hand are on the workbench and the piece is held about this same level.

Re: Signing work

#3

Re: Signing work

Phil Powell

>I know this is a crummy photo mostly because my cheap camera won't do close-ups.

However, this is how I sign my turnings.....with a brand I had made by brandnew.com.

This brand is the logo that represents my studio. I normally put in a place that can be

seen without turning the pot over. To finish the job I burn the date inside the foot ring.


img

Re: Signing work

#4

Re: Signing work

Bill Crommett

>I'm too shaky to write well, so a branding iron is ideal for me .

Re: Signing work

#5

Re: Signing work

jeff myroup

>Phil,

I went to the site you posted about and it sent me to a song download site. could you post the entire link.

Jeff

Re: Signing work

#6

Re: Signing work

Phil Powell

>Sorry Jeff I posted the wrong address. Here's the correct one: http://www.brandnew.net/

All I had to do was email the company a jpeg of my logo and give them a finished size. The

brand fits into a solding iron I already owned and "Bob's your uncle".

Re: Signing work

#7

From my limited experience...

david

>A search for a suitable branding iron turned out to be a lost cause. One problem was the ability to get much fine detail into the brand. One may have been the time it took to get the iron up to temperature. Most significant was the inability of the brand to be seen on dark grained woods. The brand worked reasonably well on light colored soft woods, but beyond that, I considered it to be a bust. Given what I just said, I do realize that an abstract design or logo may prove to be more easily applied with a brand.