Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Finishing Elm

Posts

Finishing Elm

#1

Finishing Elm

Jorge Castaneda

>Hello,

I am working on a number of elm pieces, harder than granite but with a very interesting grain, my problem is: it has many pores and very large, so I would like to know, what you folks do and use?

An idea that came to mind is to use something that fills the pores and colors them in a contrasting color, that would work for other woods as well like ash and red oak, any ideas?

Thanks

Jorge

Re: Finishing Elm

#2

Re: Finishing Elm

Ray Binnicker

>I friend of mine gave me some elm a few years ago. You are right; it is hard ! I've had good results by sanding through to 320 grit, a good soaking of a danish oil followed by about 5 coats of wipe on poly ( I like the Minwax brand), a light sanding between coats. I'm not a fan of the fillers. Seems like they change the natural order of things.

My 2 cents

Ray Binnicker

Re: Finishing Elm

#3

Re: Finishing Elm

Jorge Castaneda

>Ray,

Thanks for your input, I think I may follow it in the large pieces and maybe just the danish oil in the small ones; the thing about the filler was one of those ideas that creep in.

Thank you!

Jorge

Re: Finishing Elm

#4

Re: Finishing Elm

Clay Foster

>I really like working with coarse grain woods like elm, ash, pecan, and oak and filling the grain with colored filler. I mostly use tile grout, but spackle will work as well. Either can be tinted with acrylic paint. Here's a picture of a pecan bowl and table with the carving and grain pores filled with tile grout after the wood was burned and wire brushed. There's tile grout around the brass wire decorations and the brass brads holding on the old sheet iron on the table top.


img

Re: Finishing Elm

#5

Re: Finishing Elm

David Breth

>Jorge -

I've used Minwax Antique Oil and I've used Deft. Didn't like either. My thought, the elm turned kind of yellow and dirty looking with the oil, and deft made it look plasticy. I'm planning on a wipe-on poly next time around.

David B.

Re: Finishing Elm

#6

Bob Moffett

Re: Finishing Elm

Bob Moffett

>Jorge,

I have done quite a few piece in Elm and have gotten a good finish using Waterlox. I use 3 coats of Waterlox Satin Sealer and 3 coats of Waterlox high gloss. I let each coat dry overnight. After the last coat of gloss, I let it cure for about a week, or when I get back to it, and then buff with Beal Buffing System. This gives a good smooth finish.

Re: Finishing Elm

#7

Re: Finishing Elm

Barbara Gill, Remlik VA

>Jorge, I use a penetrating oil. I get a real good soak on the first coat. After it is dry I sand lightly with 600 or finer paper and then apply another coat. After the second coat has dried (of course I am wipping all the excess off each time) I wet sand, wipe and dry.

Re: Finishing Elm

#8

Re: Finishing Elm

George Van

>"Jorge, I use a penetrating oil. "

Hi Barb,would that be Velvit Oil?

Re: Finishing Elm

#9

Re: Finishing Elm

Jorge Castaneda

>Wow Clay, nice work, I am afraid is out of my league.

I will try it some time tho.

Thank you

Jorge

Re: Finishing Elm

#10

Re: Finishing Elm

Jorge Castaneda

>David,

I will have to hear everybody before I make my mind, I was leaning towards oil but now I don't know.

Thanks for the heads up.

Jorge

Re: Finishing Elm

#11

Re: Finishing Elm

Jorge Castaneda

>Hi Bob,

I should try that in the smallest piece and let the lady decide if she likes it, sounds laborious but I take your word it is a good finish.

Thank you!

Jorge

Re: Finishing Elm

#12

Re: Finishing Elm

Jorge Castaneda

>Hi Barbara,

I was just thinking of you, I picked up the can and it is empty, I'll email you tomorrow. : ))

Thanks!

Jorge

Re: Finishing Elm

#13

Roger in MO

Re: Finishing Elm

Roger in MO

>I've used MinWax Tung oil on several elm burls, multiple coats, and have been pleased.

Re: Finishing Elm

#14

Re: Finishing Elm

Terence Rice

>I made a salad set from Red Elm for my niece. I saturated the bowls with walnut oil. It is four years old and still looks great.

Re: Finishing Elm

#15

Thanks to all!

Jorge Castaneda

>

Re: Finishing Elm

#16

Yep George It Would. :-)

Barbara Gill, Remlik VA

>