Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Chainsaw poll

Posts

Re: Chainsaw poll

#26

husq 385xp 32" husq 55r 20" husq elec

fred

>didn't think i'd be interested in the electric but its become the workhorse in the shop.

rip chain on the 385 makes pithing a snap

Re: Chainsaw poll

#27

Dick Hines

Big Orange "Stihl"

Dick Hines

>

Re: Chainsaw poll

#28

Re: Stihl

Jerry Whitaker

>I really like my Stihl when it is not in the shop. Only 5 months old and was put in the shop yesterday for repair. Needs a new electronic module which has to be ordered and will take 10 days. At least the module is guaranteed for life and I imagine it is rather expensive. There were two others there for the same reason....must have been a bad batch.

Re: Chainsaw poll

#29

Re: Chainsaw poll

Bruce in Saint John,N.B.

>I don't harvest my own lumber but I do harvest my own turning blanks. I presently own and use weekly, an old Homelite 16" bar which refuses to give up. All my friends have Stihl and Husky's which I believe are the two best brands made. I do think the Stihl have a slight edge on husky but both companies manufacture first class saws and stand behind their product. So you no doubt can see when my Homelite retires I plan one replacing it with a Stihl. I have an electric Poulan that I use in my basement workshop as the rest of the family don't care for the noise from the gasoline powered Homelite.

Re: Chainsaw poll

#30

Husky 365

stacey s

>It's a great saw and is more than powerful enough for all my needs. It will run up to a 28" or 32" bar if needed. Also a good investment is the chainsaw chain sharpener from Harbor Freight. It does a great job of sharpening chain. Especially if the majority of your work will be close to home. I would also suggest looking at Bailey's. They are into timber industry supply and have great prices on chains and bars. They also sell Husky saws.

Stacey

Re: Chainsaw poll

#31

Husquvarna 353

Jorge Castaneda

>Without reading the other post, my saw is the Husky 353 with a 16" bar.

It is powerful enough to do anything I've asked of it, and it was the lightest one. When I was on the market for one, I asked the pro woodchoppers and there were divided, Jonsereds, Sthill, Husky, so I went to all dealers and saw how many saws were on repair, a couple dozen on the Sthill, none one the Jonsereds, none on the Husky, then the dealer told me Both Jonsereds and Husky are made on the same factory with the same parts. I picked the Husky because was a little lighter and starts everytime at the second pull.

$0.03 adjusting for inflation

Jorge

By the way, I mange 20 acres of forest and heat with wood.

Re: Chainsaw poll

#32

Stihl 361 with 20" Bar

Barry Turner

>Dang fine saw. Great improvement over the Poulan/McCulloch/Homelite big box store saws. Lots of power. A bit heavier though, but not bad.

Re: Chainsaw poll

#33

Bill Blasic

Re: Stihl

Bill Blasic

>Stihl 066 w/various bars, 18" Poulan Wild Thing for the small stuff.

Re: Chainsaw poll

#34

2 - Husky's

Wilford Bickel

>Use a Husky 350 with 18 inch bar and a little Husky 145 (IIRC) with 14 inch bar. The little one is great for limbing and cleaning up fence rows around the farm. The 350 was bought last year to replace my old Mac 10-10 that is very quickly dying and has become worse than difficult to crank and run. I really like both Husky's and have enjoyed the 350 for cutting my bigger blanks!

Re: Chainsaw poll

#35

Re: Stihl

Bill Luinetti

>18" bar, ALWAYS starts by the second pull...ALWAYS!

Bill

Re: Chainsaw poll

#36

Thank You All!

Robert Henderson

>This forum is the greatest resource in the world!

A great bunch of people!

Thank you all!

Re: Chainsaw poll

#37

Re: Chainsaw poll

Mike from Tn.

>OK Fellas!! I've got an old McCaughla thats been pounding the wood for 20years. Would I like a spiffy new shiney saw thats lite and easy to handle? And weighs 15 lbs less than this old horse? You bet your Life I would. This ones bout to kill me. But the ol' gal just won't die. With the price of the new ones it's about time to upgrade.

Re: Chainsaw poll

#38

Re: Is that a stealth gloat on the koa?

Doug Leite

>No gloat. That pic is a couple of years old and at that time I was cutting wood like that every month or two. No more dead or blown down trees at that ranch right now. I am presently working on the last bowl from one of those loads right now.

Doug


img