Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Chainsaw poll

Posts

Chainsaw poll

#1

Chainsaw poll

Robert Henderson

>I'm starting to get the turning bug big time.

It's time to consider getting a decent chainsaw.

Would those of you who harvest your own lumber

please share your experiences / recommendations

as to size, brand, model, etc. of chainsaws you

have had experience with?

Thanks!

Re: Chainsaw poll

#2

Stihl

Rick Davenport

>'Nuff said

R

Re: Chainsaw poll

#3

Re: Chainsaw poll- Husky

Ken Oakley-Sunny St. Cloud, Fla.

>Check out my post on the message board ,my first attempt at posting pictures. That is a Husky with a 24" bar. Still runs like new after 2 1/2 years. I have used both the Stihl and The Husky and find little if any differance. From what I have read if you need repairs or service of the Stihl, you have to go to an authorized Dealer for it. No big deal,unless you don't like the guy.

Re: Chainsaw poll

#4

Another for Stihl...

Peter Teubel

>Rob, this is a Ford/Chevy/Dodge issue. Everyone is loyal and even passionate to what works for them. Husky and Stihl are the top brands.

Personally, I have all Stihl equipment (390, two 170's, and E180). I found out awhile ago that buying good PROFESSIONAL equipment only hurts once...

Re: Chainsaw poll

#5

Stihl-Pro

Thomas Skaggs, Foothills of Mount Level

>I've used several brands (mostly home consumer level) and found using chainsaws to be a dreaded chore...until I bought a professional level Stihl.

Tom

Re: Chainsaw poll

#6

Re: Chainsaw poll-Solo

georgetroy

>Purchased from my local dealer. 18" chain, all is well at this time. Must be a year old, have case for it. GT

Re: Chainsaw poll

#7

Re: Chainsaw poll

John Pickett

>I have an 18" Poulan for use in the woods. Unfortunately it is out of commission as the primer bulb is cracked.

I also have a 14" Craftsman electric which I find very useful around the shop and yard.

My landlady had a 50' elm cut down at our place in Dec. and I used the Craftsman to cut the whole thing into turning squares, bowl blanks, and larger manageable pieces for storeage in my garage.

Re: Chainsaw poll

#8

Husky 385 w/42" bar

Bernie

>

Re: Chainsaw poll

#9

Re: Chainsaw poll

Greg Haugen

>I have a Husky and an ancient Olympik. The ancient saw is my "work" saw and the husky is my "finese" saw. Both have 16" bars but the husky is 38 cc and the oldie is 60 cc. For the price I don't think you can beat Husky's. I don't have an issue with Stihl I just think they're priced a little high. If you're not used to saws I wouldn't go any higher than 60 cc for your first saw. You get what you pay to some point. But don't overlook a "freebie". My good old say costed my 40 bucks. Someone was throwing it away because it didn't have a rope and it had a broke spring. $40 dollars later I have a pretty sweet 60 cc saw. Like anything else, one is nice, two is better.

Greg

Re: Chainsaw poll

#10

Husky X 2

Doug Leite

>Advice given to me by an old timer in the business was,

"Big saws can cut small wood, but small saws can't cut big wood"

"People with small saws leave all the big wood behind, or butcher it to H---."

I have 2 husky pro saws.

#1 is a 372 XP with a 32" bar

#2 is a 2101 with a 42" bar and chain

Pic shows the 42" bar almost buried in some Koa

Aloha

Hawaii Turner


img

Re: Chainsaw poll

#11

Husky 385XP

Roger Smith

>with 30 inch bar.

Re: Chainsaw poll

#12

Re: Chainsaw poll

Bill Hale / Woodspinner

>Get the biggest you can handle safely and are able to start.

Husky or Stihl I use a Stihl 310 18 in or a Stihl Pro 360, I think 20 in bar.

Bill in Casa Grande, AZ.

Re: Chainsaw poll

#13

Stihl and Husky- I have both

Barbara Gill, Remlik VA

>Right now my everyday saw is a Stihl MS280. I am happy with it. I have the 16" bar because sometimes at the sawmill I need to notch out logs so the sawmill can pass. The 18" bar would be too awkward to try to saw horizontally. It does not have that easy start thing but I never have had trouble getting my Stihl saws to start. I have used Stihl saws for 26 years.

We also have a Husky 394XP. This is what we use for the big stuff. Most of the time it runs a 36" bar. It would not be a good everyday saw for turning stuff.

I think you would probably be happy with either brand.

Re: Chainsaw poll

#14

Keith Tompkins

Re: Chainsaw poll

keith tompkins

>Stihl 028 Super. this is an older professional saw, 20" bar. I bought it in 1990; now 17 years old and running strong after much useage. There is a difference between the homeowner and pro models, don't be misled by cc's alone.

Re: Chainsaw poll

#15

Re: Chainsaw poll

Tommy Holmes

>I'm in the market for a chain saw too so thanks for asking the question. I do have a 16" electric that I use around the house and love it. The electric saws do more work than most people think.

Re: Chainsaw poll

#16

Steven Antonucci

love my Stihl, but the Yosemite logging crews...

steve antonucci

>swear by Husky's. Said that the Stihl's wouldn't run at 8000'. Probably doesn't matter to you, but there you go- an opinion from someone who runs his saw 5 hours a day!

Still, I love my Stihl.

Steve

Re: Chainsaw poll

#17

Stihl

Carole Valentine

>

Re: Chainsaw poll

#18

Is that a stealth gloat on the koa?

Bruce Wiseman

>

Re: Chainsaw poll

#19

Stihl 046 NM

Michael Sinclair in Orkney

>

Re: Chainsaw poll

#20

Stihl

Mike Cunningham (Cape May NJ)

>

Re: Chainsaw poll

#21

Richard Allen

372 XP with 20" bar

Richard Allen

>Nice saw, blasts through wood. I was told that a small bar on a big saw will be less likely to bog down.

I have a 36" bar and chain when I need it. The 20" bar and chain makes quick work of most wood I come across.

Good luck with your quest.

Re: Chainsaw poll

#22

Re: 372 XP with 20" bar

Ruth Harding

>I have a Husky 360 with an 18" blade. Works for me and still going strong after 5 years. I do my own maintenance and sharpening. I used to have a husky 460 with a 30" blade but found that while great for cutting them down it was too heavy for bucking for me.

Whatever you go with, if you haven't used a saw before have a lesson in how to use it from the dealer. I have seen guys use the saw like a hand saw and pull it back and forth, I have seen guys have siezed chains because they didn't know they had to grease the bar (for those models that need it), and I have also seen guys buy new chains frequently because they saw through dirt, hit stones, and generally don't have a clue how to sharpen.

Invest in chaps and full face protection.

Whatever you get doesn't really matter, it's how you use it.

r

Re: Chainsaw poll

#23

Bo-fum

Mark Mandell - Gone Round In Jersey

>My big saw is a Husky 372 XP running a 28" bar and full skip chain. I would not trade for anything. 4 years, 30 cords of hardwood plus all the slicing/dicing for turning and it runs like new.

My small saw, however, is a Stihl [023/16]. That one is 15 years old and running just fine. When/if it dies, I'll get a MS260 Pro to replace it, even though Husky as a very high speed saw in that same class and size. The balance of the 260Pro is outstanding.

mm

Re: Chainsaw poll

#24

Re: Chainsaw poll

BAM

>Older Husky 365 w/18" bar. Works great ,but could really use a larger bar. Husky now lists this as able to take a 28" bar but when the saw was purchased 8 or so years ago it was supposed to take up to 32" The larger the saw you can afford, go for it (within reason of course). I say 24" bar would be the min , the more cc`s the better.

Re: Chainsaw poll

#25

JL

Re: Husky Rancher and a 16" Husky

JL

>