Re: segmenting sled?
ebd
>Here is a picture of one of the sleds I built. It's simple to make, holds both the piece being cut and the cut segment, and it's easy to set the stop block. I use 3/8" polycarbonate/plexiglass because it's durable, not affected by temp & humidity, easy to machine, and extremely easy to lay out (you can see through it and so can see where everything is). I use both table saw slots for more stability. Once I get it set to the exact angle I lock it down permanently with screws from the underside. It's important to make sure that the fence is dead straight.



