Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

A month of hollowforms (PICS)

Posts

A month of hollowforms (PICS)

#1

A month of hollowforms (PICS)

Mike Rubes, Apex, NC

>Hi all,

I've had my Jordan hollowers for about a month now and just for kicks thought I would show what I've been up to. After a month of use, I really like the feel of the hollowers. I LOVE the handle. Ruth was right in that it is sort of a hard rubber foam thing, but it is very comfy. I am getting the hang of using the swan neck and find that it can be very useful. Again, I am really impressed with these tools and think it was money well spent. You can be really agressive with them and hog out material or you can do some really refined cuts as well.

Anyway, since I got them back in early January, I've done these pieces. 4 of them are just rough outs, but the others are finished pieces turned from stock I'd dried here in the shop. Well, except for the collars and the Kuari wood.






Here's the same basic grouping, but with a ruler in the foreground. The biggest pieces in the back are about 6 inches across. All the ones in the back were turned from very wet maple. It was a living tree on a Friday and I got the wood on a Sunday and starting turning that Monday and did those 4 in short order.

In the bottom picture, this the wood types. The 4 unfinished ones in the back are all soft maple. The others are (L to R) maple with rosewood collar, maple burl, box elder with bloodwood collar, Kuari, burned ash, box elder with blood stain. Yeah, well about that blood stain. I was using a small homemade hollowing tool on the inside just under the lip and it caught and spun the tool out of my hand and pinched my thumb between the tool and tool rest. I heard the "CRACK", thought "drat" and turned off the lathe to check for damage. I didn't realize my finger was bleeding and got blood on the piece. The piece was ruined anyway, so I went ahead and wiped the blood off my finger on to the piece. Trust me, the piece looks a lot worse than my thumb. It wasn't much of a cut, but it bled a bit.








I really like the box elder one that made it and the burned ash piece. I think those are the best on the table so far.

Thanks for taking a peek :)

Mike

Really liking the hollow forms in Apex, NC

Re: A month of hollowforms (PICS)

#2

Turn, Turn, Turn is what they say...

Jake Niedling

>They say you just got to do some turning to learn and it looks like you have done a lot of that since you bought the new Jordan tools. I just got the 1/2" Jordan hollowing tools for my birthday last week. Have not had a chance to use them, but looking forward to it. Keep up the good work.

Re: A month of hollowforms (PICS)

#3

Re: A month of hollowforms (PICS)

Allen Neighbors

>Mike, I like 'em all. (Especially, the BoxElder with the collar.) :o)

I'd nail that one with the blood ring, somewhere near my lathe, to remind me that, seldom maybe - but sometimes, it is necessary to have a good grip on your tools. :o) Glad you pulled through. :o)

Re: A month of hollowforms (PICS)

#4

Re: Turn, Turn, Turn is what they say...

Mike Rubes, Apex, NC

>Hi Jake,

The 1/2 inch set is the set I got as well. As I said, I really like them. Good luck with your set.

And thanks for the encouragement and I agree! Turn Turn Turn!

Mike

Spinning along nicely in Apex, NC

Re: A month of hollowforms (PICS)

#5

Re: A month of hollowforms (PICS)

Wayne Leach-NW Ontario

>Mike,

Sure a a nice group of HF turnings! I look forward to the day when I gain enough experience and the tools to try something like these.

Nice work.

Wayne

Re: A month of hollowforms (PICS)

#6

Re: A month of hollowforms (PICS)

Jorge Castaneda

>Hi Mike,

So you have been busy, looking good, from the finished pots i like the manitoba maple best.

Keep on turning!

Do you get static while turning on the cold? I had to stop this morning because eveytime I touched the swithch I got a shock., and the shavings became parasitic clinging to me.

Thanks for showing

Jorge

Re: A month of hollowforms (PICS)

#7

Re: A month of hollowforms (PICS)

Mike Rubes, Apex, NC

>Hi Jorge,

Thanks for the nice words. It's been fun to be busy. I do get more static in the winter than the summer, but it's not been too bad. I stand on a big rubber floor mat, so I don't know if that helps or not? I do, however, have really bad static on my face shield. I seem to be constantly wiping the dust off of that!

I hope things are going well up in Maine. It is stil cold here, but the daffodils are blooming, so Spring cannot be too far away!

Take care,

Mike

Waiting for some warmth in Apex, NC!

Re: A month of hollowforms (PICS)

#8

Re: A month of hollowforms (PICS)

David

>Nice work, Mike. I personally like the bulbous shapes over the Egyptian jar shapes, but that is just me. Trying to emulate Carole's shapes as part of a learning curve would not be a wasted effort. Just my $.02.

Re: A month of hollowforms (PICS)

#9

Re: A month of hollowforms (PICS)

georgetroy

>I have and use the Jordan hollowing tools, but I still use scrapers to clean up in areas where needed. Nice looking bowls, thanks for posting. GT