Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

I give up on Keltons

Posts

Re: I give up on Keltons

#26

Re: I give up on Keltons

dwfII

>I sure appreciate the offer, Greg.

However, two things...first the problems I am having with the Keltons were there from day one..when they were brand new and presumably sharp. On dry wood and on green wood. Second, I use a grinder in my daily work and have for 35 years. I am pretty accomplished at maintaining an angle or an edge...although I am by no means an expert. And I still have and re-read the instructions that came with the keltons everytime I use them.

I think it is just me...I am not very experienced at turning nor have I ever had any formal lessons. There's just no place to take lessons in my area. The fact that I can use the Sorby Hollowmaster with both satisfaction and an ease that I cannot find with the Keltons has to be simple inexperience on my part. So many others who are good turners here seem to like them.

DW

In the High Desert of Central Oregon

Re: I give up on Keltons

#27

Say What ? ? ?

Barry Turner

>If you will back the tool rest away so the straight shank of the tool is supported, the torque should be minimal.

Re: I give up on Keltons

#28

ebd

Re: I give up on Keltons *LINK*

ebd

>I have the 3/8" & 5/8" Universal Supercut tools. I love them. I use the small one for fine and close-in undercutting and the large for everything else. Both leave a really nice surface and are easy to use. I've included a link. One other thing I've tried is using a carbide 1/2" cutter on the smaller one. It worked great. I picked it up at the annual Woodworkers Showcase that we have here annually.


link to tool

Re: I give up on Keltons

#29

Re: Say What ? ? ?

jeff myroup

>Barry,

The torque comes when working 6" or more inside the vessel. Moving the tool rest back will only increase the distance the tool over hangs the rest.

Jeff

Re: I give up on Keltons

#30

Re: Jeff, that's when I ...

Allen Neighbors

>really brace myself, turn up the speed, and take very light cuts.

That's the way I use my Don Pencil swan-neck, and it works for me. I also insert the swan-neck into my "Darrell Feltmate Harpoon" handle, which gives me more stability when I'm reaching pretty far over the toolrest. (My 'harpoon' consists of 24" long 1"i.d. black pipe, reduced to a 12" long 3/4"i.d. black pipe. The 1" part is filled with b-bs and plugged. Total length of the handle, with end cap and reducer is 37.5 inches. With it and the 3/4" swan-neck I can reach about 6-8 inches over the rest. With it and a 16" long 3/4" tool shaft and a 1/8" HSS cutter, I can reach about 10-12 inches over the rest with minimal chatter. )

Re: I give up on Keltons

#31

Re: Say What ? ? ?

john lucas

>I think Barry was talking about a curved hollowing tool. Those are used with the tool rest on the straight part of the tool. This seems counter intuitive at first. This arrests most of the torque, assuming of course you have one of curved tools where the cutting tip is in line with the straight part of the tool shank.

Re: I give up on Keltons

#32

Re: Jeff, that's when I ...

jeff myroup

>I need to make one of those long handles. I think that would help alot.

Jeff

Re: I give up on Keltons

#33

Re: Say What ? ? ?

Barry Turner

>My point was simply to make sure that the toolrest was supporting the straight part of the tool's shank and not the curved part. The cutting tip and the straight handle are pretty much in line with each other. I use my 5/8" Kelton's with an 12" Hosaluk-style handle from Oneway. Works pretty well. And, just because the tools are brand new doesn't mean they are sharp.