Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Wood gloat! Longish and a question

Posts

Wood gloat! Longish and a question

#1

Steve Kubien

Wood gloat! Longish and a question

Steve Kubien

>Before class this morning I decided to trip down to the city timber stash (prior to them mulching it). I spied a 3ft diamter maple log lying on its side, maybe 8-10ft long. From the distance I noticed a large bump along the top. I says out loud to no one in particular, "Man, I've gotta get a chainsaw!" Turns out there's a guys a few feet behind me and he pipes up, "Mine's in the car. Want some help?" Nice people are great to find!

Ten minutes later I am rolling this beast out and over various other logs and stumps. Judging by how I used to be a powerlifter, I guessing 250-300lbs. Pretty tough to get this in the trunk of a Saturn sedan!! Measures 26" wide, 19" tall (in the photo) and 17" deep.

Seeing a though I only have a mini lathe, how would you chunk this up? Can I turn burls while green or is this a bad idea? I am certainly open to rough turning a few things and then letting them season.

Thanks for your help and for letting me share.

Steve Kubien

Ajax, Ontario


img

Re: Wood gloat! Longish and a question

#2

Steve Kubien

2nd picture 

Steve Kubien

>


img

Re: Wood gloat! Longish and a question

#3

Re: 2nd picture

Ron in Drums PA

>Nice find! Wish there where dumps like that around here.

Seal it up before bringing it indoors.

Re: Wood gloat! Longish and a question

#4

Maybe find a friend with a bigger lathe?

Charles R. Smith

>Steve, that's a great find! Seeing as how helpful and friendly are the people who populate the woodturners' groups, I wonder if there isn't someone in your area who would let you use a bigger lathe, so that you could turn some large pieces. This looks like it would make some glorious turnings in larger sizes. And if they have a bowl coring system, you could take home some smaller hunks to fit on your mini lathe. Of course, you might have to give him/her a piece of the burl, but then they might give you something in return. I've found that I can't outgive my turning mates. :) Anyway, that is just a suggestion.

Charles in Victoria (who is going to help a fellow turner cut up some huge cedar burls this coming week)

Re: Wood gloat! Longish and a question

#5

Steve Kubien

great idea and an open offer...

Steve Kubien

>Fabulous idea Charles! Unfortunately, I would have a VERY tough time asking anyone to use their lathe. Probably stems from the fact that I would not want to lend out mine. Not a healthy way of thinking but it's what I've got.

Now, if there was someone who lived near enough to Ajax, Ontario with a chainsaw who would like to partake in some of the spoils, I would GLADLY entertain that idea.

Thanks,

Steve Kubien

Re: Wood gloat! Longish and a question

#6

Re: Wood gloat! Longish and a question

MIke from St. Clair Shores

>Steve,

If it were me, I would cut that burl up into the largest numbers of pieces of the size my would handle.

Then I would turn them green. I find that burl is much more stable than regular grain. The burls that I have turned were alcohol soaked and finished in 10-14 days. No cracks.

JMHO,

Mike

Re: Wood gloat! Longish and a question

#7

Supposed to say, "size my lathe would handle"

MIke from St. Clair Shores

>

Re: Wood gloat! Longish and a question

#8

Dick Hines

Re: 2nd picture

Dick Hines

>Great find. I think you should drop a few coins and get a chane saw. I am not sure you are going to do much with that circular saw. Kick back will be a big proublem.

Re: Wood gloat! Longish and a question

#9

Re: great idea and an open offer...

Ed in Leaside (Toronto, Ontario)

>I wouldn't lend mine out. At 4 or 5 times the weight of your "gloat" I don't think even you could powerlift my lathe out of the shop. Maybe in pieces. On the other hand, you're more than welcome to use it under supervision. Nothing like getting your feet wet in a big way. ;-) I'm not far from DVP & Eglinton.

Re: Wood gloat! Longish and a question

#10

Steve Kubien

circ saw

Steve Kubien

>No worries. The circular saw is only there to give some perspective. I did run one cut down the chainsawn surface (up and down relative to the first pic) to give me a starting line for my big bow saw or a wedge.

But you are correct, I need to get a chain saw. :(

Steve Kubien