Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

cutting tool for dremel

Posts

cutting tool for dremel

#1

cutting tool for dremel

olejon10

>does any one know were i can find a cutter for dremel grinder that i can sharpen bandsaw blades with the ones i have just grind away

Re: cutting tool for dremel

#2

Dick Hines

Re: cutting tool for dremel

Dick Hines

>I am not sure it's worth the time and trouble to sharpen bandsaw blades. Wood Craft sells 105" one for under $15. I buy 4 at a time so It only yakes me a few seconds to have a sharp blade ready to go.

Re: cutting tool for dremel

#3

Try one of the burrs sold for chain saw sharpening

Don Henthorn

>

Re: cutting tool for dremel

#4

Leo Van Der Loo

Use the cutoff disks, they work fine.

Leo Van Der Loo

>

Re: cutting tool for dremel

#5

That's what I use.

Brian Hahn in SW Wisconsin

>

Re: cutting tool for dremel

#6

Ditto

George Van

>

Re: cutting tool for dremel

#7

Re: cutting tool for dremel

john lucas

>I use a cutoff wheel to sharpen but I have to agree with Dick. I can buy my blades for $6 from a local saw sharpening service. I just toss them when they get that dull. I only use these blades for green wood. I'm going to buy another high quality blade for resawing and will never let it touch green wood. This one I might sharpen.

Re: cutting tool for dremel

#8

Steven Antonucci

Tritto (That's Triple Ditto!)

steve antonucci

>Steven Russell has shown the world how to successfully sharpen a bandsaw blade using a cutoff wheel on a Dremel. I was surprised at how quickly it goes by and how good the results were.

The cutoff wheel is used on the top of the tooth and not the gullet. I put a small piece of tape on the blade to mark the beginning and probably took 10 minutes on my 142"x 1/2" blade for my Rikon.

Why replace good steel when you can renew it?

Steve

Re: cutting tool for dremel

#9

Re: cutting tool for dremel *LINK*

Mike Brazeau

>Lee Valley sell diamond coated cutoff wheels. They are not as fragile as the ceramic grinding disks. I used a right angle adapter on my Dremmel and was really slick. You touch the top or back of the tooth. This particular disk I picked up at a woodworking show from the Bitlady. Lost some set on the blade but have significant more life for roughing blanks.


img

Lee Valley

Re: cutting tool for dremel

#10

Double up on the cutoff disks-lasts longer

David

>