Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Sort of turning-fixed metal lathe

Posts

Sort of turning-fixed metal lathe

#1

Sort of turning-fixed metal lathe

john lucas

>I spent the whole day modifying an off brand tool post system to fit my Smithy metal lathe/mill. I know this is not wood turning but it will lead to making new things for the wood lathe. I'm so excited about the possibilities. I'll be working on the metal spinning tool rest in the next week or so. I have to figure out how to cut threads with this thing to finish that project.

I was able to repair an old flex shaft machine. It had an odd length cable and I couldn't get a replacement. I built a short extension for the cable insert that holds the cable to the motor. The old spring cable had brocken and was too short to solder back in the holder. My extension worked perfectly. Kind of like the chuck question below, one can never have too many flex shaft machines either. Changing bits is like changing chuck jaws, it slows down the flow. When your carving you want to keep moving while you have the concept in your mind.

I also repaired a brocken light stand by milling a flat surface so I could drill an angled hole through the supports and legs to replace the brocken plastick pins. It's just too cool to be able to do things like that. I guess machinist's who do this for a living probably take it for granted but it opens up a whole new realm of fun for me.

Re: Sort of turning-fixed metal lathe

#2

Re: Sort of turning-fixed metal lathe

Bob Fawcett

>Sounds like great fun John, wish I could enjoy it with you.

I haven't touched a metal lathe since 1969, but I would be glad to help in any way I can.

Re: Sort of turning-fixed metal lathe

#3

Re: Sort of turning-fixed metal lathe

Allen Neighbors

>That's sounding like too much fun! Glad you're going for it, but I always wonder where you find the time for all you do, John. Have you found a way to make a day longer than 24 hours? :o)

Re: Sort of turning-fixed metal lathe

#4

Re: Sort of turning-fixed metal lathe

john lucas

>Sure allen. I just don't pay attention to the calendar or the clock.

Re: Sort of turning-fixed metal lathe

#5

Roger in MO

Re: Sort of turning-fixed metal lathe

Roger in MO

>John I can relate to your excitement. Some years ago I bought a WWII vintage South Bend bench lathe with all the gears to change feeds. What a blast to peel that metal. Building fixtures and tooling such as a 4 way tool post was a much fun as anything. Even used it to turn a bit of wood but that is not the best use for it. Have fun!