Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Crotch Shot

Posts

Crotch Shot

#1

Crotch Shot

MIke from St. Clair Shores

>Well I've been working with some birch that a friend gave me after he lost 5 trunks 2 weeks ago in an ice storm. This piece is about 7" by 11" and about 3" deep. The natural edge birch came off, but the cambien layer is pretty secure. The crotch has quite a bit of figure. I pulled this piece out of my truck on tuesday of this week. I was at a friends house with some other turners and since this was the only piece that wasn't segmented in his super clean shop, I suggested we turn this one. It was very green and we were able to show several new turners some basic bowl turning cuts. we really had fun sending those chips flying. So far just about 5 coats of Mahoney's oil finsh.All comments welcome.

Mike


img

Re: Crotch Shot

#2

Re: Crotch Shot

Ed Kelle

>Nice piece, it has a great fruit shape to it. Well done!

Re: Crotch Shot

#3

Re: Crotch Shot

MIke from St. Clair Shores

>Thanks Ed. It is a pretty bad picture. I couldn't find a good angle. I took 28 pictures of it and I settled with this one. It also is heart shaped, maybe give it to my favorite valentine.

(my wife of course)

Take care,

Mike

Re: Crotch Shot

#4

Re: Crotch Shot

Bill Youngblood

>Hey Mike,

Nice job, even if you did make a mess of my shop. Just kidding. I was glad to see the newbies learning a few things. I thought you did a great job of explaining what you were doing and why. Good show. The piece finished very nice.

Bill

Re: Crotch Shot

#5

Re: Crotch Shot

Allen Neighbors

>Gorgeous wood, and you've seemed to use it to it's best!

Re: Crotch Shot

#6

Re: The Crotch is just underexposed.

Jamie Donaldson

>

Re: Crotch Shot

#7

Question

C.W.Stivison

>If the piece was really wet on Tuesday how was you able to have it finished already. I'm new at turning and I'm sure there is a good answer. Very nice!!!

Thanks

CW

Re: Crotch Shot

#8

Re: Question

MIke from St. Clair Shores

>I usually use end sealer and put the bowls up on a shelf for 8 to 12 months then finish turn. But I turned 3 natural edge bowls from this birch in the last 2 weeks, and I did what some other turners do, turn thin 1/4" or less and make the sides and bottoms equal. It seems when you turn thin walls there is less stress abd alot of the moisture has left from turning.

Anyway, I did throw this piece in an alcohol soak and when I took it out I didn't wrap it in brown paper, because I felt it was thin enough and stable enough(because of the 3 previous pieces) I just left it on the workbench for two days and put CA glue in the 6 piths. Now I'm oiling it with Mahoney's walnot oil and Keeping my fingers crossed.

Mike

Re: Crotch Shot

#9

I was afraid of over exposing it!!! :-)

MIke from St. Clair Shores

>