Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

"To the 9's"

Posts

"To the 9's"

#1

Keith Tompkins

"To the 9's"

keith tompkins

>Another piece of holly for "small treasures". This one's about 5 1/2" tall, w. lacquer finish. The fabric appears to wrap around the opening, and disappear inside.

I am posting these photos in memory of Bob Way, who passed away yesterday. Bob was a master cabinetmaker at Hunt Furniture, where he worked for forty years. He was my shop foreman for most of the nine years I spent there. Bob took me under his wing, and shared a lifetime of knowledge unselfishly. Much of what I know can be attributed directly to him. Thanks Bob, and Godspeed.


img

Re: "To the 9's"

#2

Re: "To the 9's"

MIke from St. Clair Shores

>Keith,

First my condolences on the loss of your mentor. Secondly I applaud the fact that you were able to recognize and give credit to the person who helped you to develop the skills you have today. Many people don't give credit where credit is due. I personally think that only a person with good character can do this.

Keep it going,

Mike

P.S. This piece is as beautiful as the first time you posted it.

Re: "To the 9's"

#3

Keith Tompkins

Re: "To the 9's"

keith tompkins

>Thanks so much,Mike. He meant a lot to me.

Re: "To the 9's"

#4

Re: "To the 9's"

Philip Duffy

>Keith, Beautiful piece and a wonderful tribute to your mentor. You were lucky to have him as your guide and you have paid a fine tribute to him with is wonderful piece of holly. Phil

Re: "To the 9's"

#5

Amazing!!

Bernie

>

Re: "To the 9's"

#6

Re: "To the 9's"

Bob Way, Canton, MI

>Keith,

First off, another piece that is a real pleasure to look at. You turners who can see these kinds of things in chunks of wood will always have my appreciation for your vision.

Second, I also applaud such a wonderful tribute to somebody who had enhanced your life and skills, and enables you to do likewise for others.

Third, for a moment or two I was concerned somebody may have forgotten to tell me something. The calls to the house have been most supportive.

As always, Keith, your posts are enjoyable.

Bob Way

Canton, MI

Well south of Paradise, and a tad bit east of Hell, MI.

Re: "To the 9's"

#7

Beautiful tribute

Ron McKinley

>Beautiful work and a beautiful tribute to your friend.......Ron

Re: "To the 9's"

#8

Keith Tompkins

Re: "To the 9's"

keith tompkins

>Whoa! Bob, sorry about that! Thanks for your kind comments. Truthfully, I don't usually "see" a piece in a chunk of wood; my approach is quite different from that. I like to work with an idea or concept on paper, until I'm happy with it. I may make a model or two just to work out the details. Then, I look for the appropriate piece of wood to complete the project.On these pieces, for example, I had gone through the first two stages, was happy with the design, then found a source for the holly I wanted to use. When I approach the lathe, I have a definite goal in mind.

My mentor Bob meant a lot to me...I spoke with his wife, daughter, and son today at the wake...his kindness and willingness to share came as no surprise to them.