We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
After about a month of not turning anything, I've been back in the shop and really enjoying some time at my lathe. It feels so nice. Here's a little cherry bowl about 5" diameter, with a textured rim and foot.
>Jen, if I could see a profile on this, I suspect this little bowl might one of my favorite pieces that I have seen you do! I love the inward sloping rim with the slight launch at the inner edge, the undercut, the texturing, and what I can see of the foot. Oh, and the wood ain't bad either! :))
Glad to see you back on the lathe and posting again. I really like what you've done with this one. Like KeithZ, I am also wondering what you used to do the texturing.
>This is a really nice looking bowl. Like the others said I would love to know who you textured it. as other said I would love to see more of the profile.
I think I really like this one best, I like the rim flare on the inside edge and also the outside edge treatment too...glad to see you are back in the shop.
>Thanks Carole :) I've been trying the undercut inside the rims after seeing a Mike Mahoney video where he does it...and then seeing a few of his bowls in a local gallery here in Indy. I like the look and the feel when you run your fingers in there.
I have a profile pic at home. I'm at work now but I'll send it tomorrow.
Thanks for your kind remarks. I used a Dremel engraver to make the texture in the bands on the rim and the foot. On this one I used the pointy tip, but sometimes I'll flip that tip around and use the other end of it that I have rounded over on a belt sander. It gives a smoother texture. Almost like leather.
I'll dig up the profile picture tomorrow. I'm at work now and the pics are on my home PC.