Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

A question about alcohol drying

Posts

A question about alcohol drying

#1

A question about alcohol drying

Charles R. Smith

>I recently started using denatured alcohol to dry green bowls, and really like the results. (I've turned 50 green bowls in the last ten days and am using a digital scale to monitor the drying times). However, I find that wrapping the outside of the bowls with paper is a hassle. Has anybody gotten good results by sealing the outside with a wax emulsion (e.g. Anchorseal)? Do you also paint/seal the rim? Any other advice? Thanks in advance.

Charles in Victoria (whose lathe is slowly being inundated by a mountain of wood shavings)

Re: A question about alcohol drying

#2

Re: A question about alcohol drying

Ron in Drums PA

>For the 8-10 months I've been placing my DNA soaked rough outs in brown paper bags. I store one blank per bag, with the inside of the blank face down.

A few weeks ago I cored a couple of freshly cut cherry blanks. I didn't lose a single piece and they are ready to finish turn this weekend.

My reality is that DNA soaking works. Check is out for yourself.

Re: A question about alcohol drying

#3

Re: A question about alcohol drying (

Terry Quiram, Roanoke Illinois

>I also stick my soaked bowls into a brown paper bag. I just fold the bag opening around the rim of the bowl and store open face down on a wire rack. My loss percentage is very low.

Re: A question about alcohol drying

#4

Re: A question about alcohol drying (

Ron in Drums PA

>I should have mentioned that I flap over the bags, so they are completely closed.

Re: A question about alcohol drying

#5

Re: A question about alcohol drying (

Norm Smith in Nova Scotia

>Charlie, I use brown paper bags also. Grocery stores here will bag your groceries in paper bags if you ask. They are free.

Norm

Re: A question about alcohol drying

#6

Brown Bags

Barbara Gill, Remlik VA

>If you are not still able to get them at the store like Norm and some of us, SAMS club sells them.

Re: A question about alcohol drying

#7

Re: A question about alcohol drying

MIke from St. Clair Shores

>Check out my answer that I posted yesterday.

Be Safe and keep Turning.

Mike

Re: A question about alcohol drying

#8

Re: A question about alcohol drying

Bruce Forrest

>I haven't used it a lot on bowls, but on rough turned hollow forms that are too big for the microwave, I now use wax emulsion on the outside exclusively. I had some failures with some types of wood when they were wrapped in paper bags etc, but none since I started the wax treatment.

Re: A question about alcohol drying

#9

Check the Alcohol Soaking blog FAQs *LINK*

Dave Smith, Longview, WA

>There are a lot of answers on the blog and some of them might even be right. Because people will always do things a little different, I have tried to make available the original basis behind the protocol I developed. Also read the article about alcohol soaking in Wood Centrals archives.

The purpose of the paper on the outside is to slow the drying rate of the outside to reduce tension cracks. Drying the inside faster causes the bowl to under go compression. You can apply sealer to the outside instead of using paper. I found that the process was more of a hassle and, in the few pieces I did track, I found drying took longer. Wally Dickerman related to me that he has waxed the outside of bowls for years when he puts them aside to dry. He says he has had few failures using that method.

I reduced the failure rate due to cracking by wrapping the bowls with paper instead of just putting them in a paper bag.

Good luck.

Dave Smith

Not enough time to answer all the recent question in Longview, WA.


Alcohol Soaking Q&A

Re: A question about alcohol drying

#10

Re: A question about alcohol drying

C.W.Stivison

>Bruce, Is wax emilson something you buy or somthing you make.

CW

Re: A question about alcohol drying

#12

Re: A question about alcohol drying  *LINK*

Ron in Drums PA

>


https://www.uccoatings.com/