Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Small beech dish *LINK*

Posts

Small beech dish *LINK*

#1

Small beech dish *LINK*

Pat Taylor

>Turned this last night; 4" diameter. I went for the "birdbath" shape on top and a contrasting outer profile. I used the microwave (2 min, 4 min, 3 min) to dry it before final turning. It warped like crazy! The tenon was almost football shaped afterwards. Turned 2 more roughed bowls from the same piece, one with a large knot and bark inclusion. I'll post those when they're finished.

BTW, does anyone else here write a woodturning/woodworking blog? The format lends itself well to informally capturing day to day lessons-learned, so as a new turner it would be helpful to read about other people's experiences. I've been writing one, and I think someday it will be fun to read about how little I knew in the "early days". If you have one, please share a link (mine is below) for the rest of us to enjoy.


img

http://www.beadsandcoves.com

Re: Small beech dish *LINK*

#2

Here's a front view

Pat Taylor

>Sorry for the poor photo quality....


img

Re: Small beech dish *LINK*

#3

The impression I get is... (long)

david

>that you are sacrificing "Paying your dues" by wanting quick results. Your enthusiasm is evident, and I love your blog (Andi Wolfe is the only other one I am aware of). Sometimes you need to look at this woodturning like an extended project. When you get fresh wood, it is great to turn it green and see the shavings fly, but the finished bowl sometimes is months in the future. With some woods, there is no substitute for letting it dry on the shelf at its own pace. Some require additional treatment to prevent splitting, and experience in your shop microclimate is the only way to tell.

I remember when I could not wait to finish the piece once started, and still have to remind myself at times that I need to wait until the piece dries. Paying your dues involves practice, practice, and more practice. Practice will enable you to find out whether it is better to pull or push a gouge when making a particular cut. You may find out how another more experienced turner does it on this forum, but there is no better method than actually doing it yourself. It is better to have a huge catch on a practice piece headed for the fireplace than on a lovely piece that was intended to be a keeper, for lack of technique that comes with practice.

Re: Small beech dish *LINK*

#4

Re: Small beech dish *LINK*

Raymond Overman in SC

>Pat, I have a blog that I started at the end of last year. Not much out there yet but you're welcome to look.


My Blog

Re: Small beech dish *LINK*

#5

Re: The impression I get is... (long)

C.W.Stivison

>Being a newbie to turning I was on my way out to my workshop to start the heater so I could turn a piece I dipped in achohol last week and and set up to dry. Like Pat I want to finish a piece to post on WC for my NBF,s to see, but since reading David's response to Pat I think I will just stay in tonight, let me and the wood dry some more and read WC archives. After I post a picture of my first bowl I won't be a lurker (RIGHT)LOL.

CW

Re: Small beech dish *LINK*

#6

Re: The impression I get is... (long)

David Breth

>Dave -

You're right - practice and patience are key. But I don't really think Pat is avoiding dues, in fact I'm not sure that's possible. Maybe just letting the dues wait for a few minutes. Thinking back to when I started, I just had to excercize my enthusiasm by making stuff before I had instruction. I had no tools, and little wood. In my near total innocence (ok, ignorance) I beat pieces of poplar and pine to death with a chisel. It didn't take long for me to want instruction and to grow some patience with myself - looking back, I have no idea where the patience came from.

My first bowl was made during a class with real tools I had just purchased. I was so proud of my little walnut bowl, and treated it so delicately. I've made many things over the years, but I don't think I have ever been more stupidly proud of anything than that bowl. I felt like a little grinning kid. It was such an encouraging thing to me. I knew I had a ton to learn, but at that moment, with my first bowl in hand....it felt just GREAT.

Many dues have been paid since my enthusiastic chisel/poplar days - runaways off the lathe, finger smacks, heartbreaking blowups, the spending of cash nobody tells you you will spend when you first start turning, sanding frustrations, the surprising smell of freshly cut Elm, finish frustrations....and the paying of dues continues.

So - Pat - the short story is this. Energy is contagious. Enthusiasm Spreads. Patience is a virtue. Safety is everything.

David B.

Re: Small beech dish *LINK*

#7

Re: The impression I get is... (longer)

Pat Taylor

>david,

I agree with you on some counts, but disagree on others. I agree that turning requires patience in many areas, such as learning good technique, letting wood dry properly, etc. However, I don't think I'm avoiding paying dues.

I have tried some methods that yield quick results, like turning wood while it's green and letting it warp, because part of being new to this is wanting to have a finished product of almost ANY kind to take inside and feel great about, no matter how bad it is (like David B. and his first bowl). I've also rough-turned some bowls and set them on the shelf to dry, so I can see what results I get doing that. Last night I tried the microwave method to see what happens, and I've also tried the DNA drying method.

I think the point is that I'm trying all the different techniques I'm reading about and seeing what happens. I'm practicing my cuts, trying different woods, in different sizes and orientations, and with different chucking/faceplate methods. In the process of trying new things, I'm getting tons of practice too. I may be new to this, but to me this sounds like paying your dues.

Since this is only typeface, please understand I mean the tone of this to be nothing but positive. Hearing other people's point of view adds to my learning experience, so I appreciate your response.

Re: Small beech dish *LINK*

#8

Nice work on your blog, Ray!

david

>And the turned pieces are not bad either. I like those natural edges.