Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Fluted, dyed, limed ash vessel

Posts

Fluted, dyed, limed ash vessel

#1

Fluted, dyed, limed ash vessel

Bruce Forrest

>This is an ash vessel which has been turned, routed, shaped, dyed and limed. It measures about 9 3/4 inches tall. It's part of a series of different colors that I've been making. Started out with a plain vessel, then the next one added flutes, and then came the dye and liming. Any and all comments are welcome.


img

Re: Fluted, dyed, limed ash vessel

#2

Very Cool!!

MIke from St. Clair Shores

>Bruce,

I've been dying some ash bowls different colors then using the liming wax, but none of them looked this good. The fluting looks great. Really nice job, thanks for posting.

Mike

Re: Fluted, dyed, limed ash vessel

#3

Re: Fluted, dyed, limed ash vessel

Dale Cook

>This is a very cool piece Bruce. Beautiful work,the form is great and the flutes are what make it special. Thanks for posting this.

Re: Fluted, dyed, limed ash vessel

#4

explain liming please

Tom Sontag - St. Louis

>I suppose I could look it up somewhere but I felt you would not mind telling us a leeeetle more about this awesome work. I was with you all the way through dying; what does liming do?

Re: Fluted, dyed, limed ash vessel

#5

Re: Fluted, dyed, limed ash vessel

Mike Rubes, Apex, NC

>Hi Bruce,

Very, very nice! I like that. Makes me think of a piece of exotic fruit!

Great attention to detail.

I am also curious (like others) about what "liming" means?

Thanks for the pic,

Mike

Re: Fluted, dyed, limed ash vessel

#6

Liming Wax

MIke from St. Clair Shores

>I got my Liming Wax at Woodcraft. Mine is made by Bri Wax. The way I use it is only on open grained wood that has been dyed. Then the Liming wax is applied and it fills the pores and then you buff it off the surface. The grain is then white and the contrast to the color of the piece looks pretty cool. Just like the fluted vase in this post.

Mikw

Re: Fluted, dyed, limed ash vessel

#7

Re: Fluted, dyed, limed ash vessel

Bruce Forrest

>I'm aware of two main brands of what's called liming wax. One is Briwax and the other is Liberon. Both are a white pigment in a beeswax base. With woods like oak, ash and I think elm, it's used to fill the pores and show off the grain. Dying a dark color is often used to increase the contrast. Some people use a wire brush to remove some of the soft wood to increase the effect even more.

Once the piece is dyed and sealed, the wax is applied (very sparingly). A little goes a long way. Then some different methods emerge. Some say to leave 5 minutes, others 20 and others longer, but the gist of it is to wipe off the excess and leave it in the pores. Some wipe it off with a coat of clear wax. Others use mineral oil or mineral spirits, some use steel wool, or fine sanding even. Or just plain rub with a soft cloth. Then you can leave as is, coat with clear wax or use a spray on protective coating. It's time to experiment to see what works for you.

Hope this helps. Bruce

Re: Fluted, dyed, limed ash vessel

#8

Wow!

Ron in Drums PA

>Really Nice Bruce

Re: Fluted, dyed, limed ash vessel

#9

Re: Fluted, dyed, limed ash vessel

Thomas Skaggs, Foothills of Mount Level

>Very cool. The grain pattern really plays beautifully with the shape and flutes. Wonderful piece.

Tom

Re: Fluted, dyed, limed ash vessel

#10

Re: Fluted, dyed, limed ash vessel

keith zimmerman, Normal, IL

>Would buffing with White Diamond accomplish the same thing? Just curious because using it will turn the grain of walnut white.

keithz

Re: Fluted, dyed, limed ash vessel

#11

Re: Fluted, dyed, limed ash vessel

Michael Sinclair in Orkney

>I like that one a lot.I have been playing with some carved pieces, if I could get half as good a result as that I would be well pleased.

Great work

Michael

Re: Fluted, dyed, limed ash vessel

#12

Re: Fluted, dyed, limed ash vessel

dtewell

>Just received the Bill Grumbine first video for Christmas. Bill says never to use the white diamond on walnut. The fibers of the wheel are what turns it white and it's almost impossible to get them out. Probably wouldn't look the same.

Re: Fluted, dyed, limed ash vessel

#13

Re: Fluted, dyed, limed ash vessel

Bruce Forrest

>I thank everyone for the comments. I'll have to post on this site more often.

Re: Fluted, dyed, limed ash vessel

#14

Absolutely Beautiful, Bruce!

Ruth Niles

>

Re: Fluted, dyed, limed ash vessel

#15

Re: Fluted, dyed, limed ash vessel

Jennifer@Indy.USA

>Bruce, I saw this over on WOW and loved it there....just as much as I love it here!

Very nice job with the dye and liming...and the carving and turning and everything :)

Jen