Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Walnut burl vessel

Posts

Walnut burl vessel

#1

Walnut burl vessel

stacey s

>Here is another vessel that I turned recently. One of the members in my turning club gave me this piece of wood and this is what finally came of it. It is about 5 inches in diameter and 3 to 4 inches tall I don't remember right now. Finished with semi gloss lacquer.Critiques welcomed.

Stacey


img

Re: Walnut burl vessel

#2

Re: Walnut burl vessel

MIke from St. Clair Shores

>Stacey,

I really like it. The burl is really beautiful. Did you add the collar or just color it?

Either way the color really is a good choice since it looks like it is the same as the color running thru the burl. How thick did you make the walls?

Mike

Re: Walnut burl vessel

#3

Re: Walnut burl vessel

stacey s

>Mike,

I glued the collar on. It is actually turned to the same thickness as the rest of the vessel.

Stacey

Re: Walnut burl vessel

#4

Barb Siddiqui

Re: Walnut burl vessel

Barb Siddiqui

>Stacey- I really like the bead at the foot. I've never seen that before, and it's very attractive.

Re: Walnut burl vessel

#5

Re: Walnut burl vessel

stacey s

>Thanks Barb, to get this all I did was to leave the outer edge of my tennon when finishing the foot and then rounded over the corners to give it the beaded look(a part I still need to practice more on) But the bead adds a lot to them I have done this on several recently and really like the look that it adds.

Stacey