Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Another tool rest question

Posts

Another tool rest question

#1

Another tool rest question

Ron in Drums PA

>I have a round tool rest and think it's great. Although, with the type of turning I'm doing lately, I find that I need to get closer to the work.

Somewhere, I noticed a tool rest that looked like a 1/8" (or so) round stock was welded to the top of a short section of angle iron. I'd make one myself if I had the equipment.

Does anyone know where I can purchase one like this?

TIA

Re: Another tool rest question

#2

Re: Another tool rest question

RK in Milwaukee

>Sounds like the rest that Cindy Drozda made for small spindle work.

Ron Nelson

Re: Another tool rest question

#3

hope this is it. *LINK*

john lucas

>Ron I think Woodcraft has it. It'a called a woodcraft tool rest system.


http://www.woodcraft.com/family.aspx?FamilyID=391

Re: Another tool rest question

#4

Re: Another tool rest question

Allen Neighbors

>Ron, see the post I just made, Re: Jim, or everybody, even...

Re: Another tool rest question

#5

Tool Rest Problem

Jim

>I just saw one at woodcraft.com. It has a small rod on top...

Re: Another tool rest question

#6

Re: The round rod is drill rod, and .....

Jamie Donaldson

>....I have 2 of different lengths that I use for my hollowing rig. I can't remember the name of the maker before Woodcraft- seems there was a River in the name?? I've had these rests for probably 15+yrs. and they work very well without any nicks.

Re: Another tool rest question

#7

Looks Good!

Ron in Drums PA

>Thanks John

Re: Another tool rest question

#8

Nice POST, Allen! :-)

Clem Wixted, Jonesboro, AR

>

Re: Another tool rest question

#9

Brad Vietje

Re: hope this is it.

Brad Vietje

>I have one of these, and frankly, I wish it was tilted forward like most toolrests, instead of coming straight up from the vertical support post. Does work well, but I think I'd like it more with a forward lean...

Safe spinning,

Brad Vietje

Newbury, VT

Re: Another tool rest question

#10

I got tired of filing

Don Henthorn

>the top of the tool rest to take the nicks off so I epoxied a length of 5/16" drill rod to the rest right at the front edge and never had to file again. Worked for me

Re: Another tool rest question

#11

Re: I got tired of filing

Allen Neighbors

>Yea, Don! 5/16 huh? Good size!

Re: Another tool rest question

#12

Re: hope this is it.

MIke from St. Clair Shores

>The longest tool post is only 5" I use the rest but had to make a longer post for PM3520A

Mike