We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
The 10" diameter Tormek will likely not get to the edge of the took you are sharpening until you have "sharpened" it for a while. The honing can also inhibit the sharpness of a turning tool.
If you spend time with the Tormek, use a marker on the surface that is being ground away to tell how much of the wheel is actually working for you.
The best way I have found to tell when my tools are less than sharp is to sharpen two tools the same. Use one until I question the sharpness. It could be the wood, the orientation, the technique or the sharpness. Pick up the other tool and turn some. If the results are the same then the tool wasn't dull. The fresh tool cuts better then it is most likely sharper than the used tool.
You could go to the sharpening system with the first and only tool. But the activity of sharpening will make the comparison before and after more difficult to evaluate.
>Stuart Some people do. I have no problem with it. A sharp tool is a pleasure to use and a sharper tool is even better. Each person decides how far they want to go.
I totally disagree with anyone who says that it is possible to have any edged tool that is too sharp. A sharp tool cuts better than a dull tool, and a super-sharp honed edge cuts better than one with a serrated edge straight off the grinder. There is no such thing as a cutting tool that doesn't benefit from a sharper edge, and THERE IS NO SUCH THING AS BEING TOO SHARP.
The bowl gouge may be the only exception, and that is only be because we can get away with a cutting edge on a bowl gouge that is just "good enough", and most of us are willing to accept what we get from that. We compound the problem with the blunt angles we grind into the tool and how we use it to remove large quantities of wood. In this environment we can't tell the difference between super-sharp and just "sharp enough". Even those of us who justify "good enough" because it is faster, still know that the super-sharp honed edge always works best on that last finishing cut. Somehow, it never occurrs to us that those heavy cuts might also benefit from the sharper tool.
If we started using different angles on our bowl gouges, and accept that turning an entire bowl with one tool might not be the best way to do it, we can start honing our bowl gouges to super-sharp and be able to tell the difference.
I don't use a Tormek and I don't hone most bowl gouges because I am one of those who too easily accepts "good enough". Not so with skews and spindle gouges. I make them super sharp and polish them off with a hard buffing wheel or leather strop because the sharper the better. I even rub some Jewelers Rouge on a tenon of a large turning so I can hone the tools on the fly, because they cut better that way
>I couldn't agree with Russ and Clay any more. The argument that a serrated edge cuts better has not been my experience. I have my carving tools and my handplanes as sharp or maybe even sharper than a razor and they cut wood exceptionally well. Like Russ I keep my skew honed with a leather strop.
When rough turning bowls I tend to get lazy and not sharpen enough. I always chastise myself when I do sharpen and come back to the wood. it cuts so much easier you wonder why you stood there and battled with the wood when you could just sharpen the gouge go back to a relaxed style of turning.
As Russ clearly stated we all compromise when it comes to a bowl gouge. We know that a more acute edge will cut cleaner and with less effort than a blunt edge most of the time. (There are those wierd woods that almost need to be scraped) However you give up the edge holding capability with these acute edges. On a bowl gouge we are often hogging away wood and a more blunt angle will hold a reasonably sharp edge longer. Notice I didn't say dull tool, even a blunt angle can be razor sharp.
>Ellis you should have gotten one last year if you renewed. I don't remember all the details but I think if you renewed by the 1st of Jan. you got the sharpening CD. I'd call Mary Lacer and ask. It's an excellent video.