Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Need help getting large blanks onto lathe.

Posts

Re: Need help getting large blanks onto lathe.

#26

Brad Vietje

Home-Built Crane ???

Brad Vietje

>...probably revealing WAY too much here...

This is a picture of an 8' diameter wheel and crane in my house, a former farm building converted to a home about 40 years ago. My wife and I now use this loft as a bedroom (with a much-improved ladder). The wheel is a huge pulley connected to a 10" diameter shaft suspended between 8 x 8 columns that hold up the roof. The shaft is drilled through, and a rope with a knotted end winds around it with a hook at the free end (rope and hook have been removed for marital harmony...). This can be used to lift really heavy things (you don't really want to know !). I thought of building a 2' or 3' pulley and a 4" shaft about 4' long to lift logs up to the lathe, or a similar idea at a scale that will work for any given shop. The ceiling fan is optional -- and won't be there much longer, since I need to move it up to the ceiling.

Safe spinning,

Brad Vietje

Newbury, VT


img